Lincat GR3nFL [9/12] Component replacement

IS330 ECN3592 9

COMPONENT REPLACEMENT

Access to gas circuit components can be made when the hood and side panel are removed

as described earlier.

Burner

• Remove the six burner retaining screws (not shown) and lift the burner Z from the

support bracket.

• Fit the new burner.

Injector

• The burner injector Y can be

removed separately using a ¼"

AF spanner.

• Replace the copper washer

(CO113) and fibre washer

(WA08) when fitting a new

injector.

Thermocouple

• Loosen the thermocouple lock

nut N at the valve body O.

• Remove the two thermocouple

mounting screws at the burner

support bracket.

• Draw the thermocouple capillary through the body.

• Fit new thermocouple and re-assemble components.

Valve

• Loosen the burner feed pipe nut T and the thermocouple lock nut N.

• Remove the control knob R from the valve spindle.

• Loosen the valve clamp screws from the manifold.

• Free the valve from the pipe work and manifold.

• Remove the burner feed compression fitting from the valve and fit to the new valve

with a suitable thread sealant (Loctite 577 recommended).