Vitek VT-3535 [5/20] English

SETTING UP

• Set up the transmitter(s) before setting up

the receiver

1. Remove battery cover and insert batteries

to start setup 2 AA size batteries (included)

Insert batteries into compartment observing proper

polarity

2. HOUSE CODE will flash for 8 seconds

3. Select HOUSE CODE (1-15) by pressing

C/F and pressing SET to CHANNEL setting

If you have multiple transmitters for a single receiver, set each trans-

mitter to the same

House code

4. CHANNEL will flash for 8 seconds

5. Select CHANNEL (1-3) by pressing C/F

If you have multiple transmitters for a single receiver, set each trans-

mitter to a different

Channel code

6. Humidity & Temperature will alternatively display on LCD screen

7. Select °C or °F of Temperature by pressing C/F

• Use a different house code if your weather station detects other signals

from neighboring sources

• Factory default: house code = 01 and chan-

nel = 01

1. Remove battery cover

2. 2 AA size batteries (included)

3. Insert batteries into compartment, observing

proper polarity; replace cover

REPLACING BATTERIES: symbol on receiver will appear when batteries

need to be changed.

Transmitter: Lo bat will be displayed

ENGLISH

Setting up transmitter(s)

Setting up receiver

3535.qxd 31.08.2004 10:01 Page 4