Vitek VT-3535 [6/20] English

SETUP

Automatic Learn Function:

1. Learn function executes automatically and runs for approximately 3 min-

utes when batteries are first installed in the receiver.

2. Within these 3 minutes, receiver picks up the temperature & humidity sig-

nals from remote transmitter and displays the readings.

Manual-Learn (Searching for Remote Signals):

If a new remote transmitter is added or if signal is lost (outdoor display blink-

ing), learn function must be executed again.

1. Press & hold ALRAM/(AM/PM)/(C/F) for 3 seconds to start.

2. Beep sound indicates that learn function has started.

3. 'Channel' symbol will flash and unit will beep as each transmitter is

detected.

4. Temperature & humidity readings of remote transmitter displays on the

receiver.

• Press & hold Channel for 3 seconds to start

auto channel scroll function. In this mode,

the display will scroll through the data from

all the valid channels, each of which will be

shown for 8 seconds.

• Press & hold Channel for 3 seconds again

to disable this function.

ENGLISH

3535.qxd 31.08.2004 10:01 Page 5