Hama TH-130 Инструкция по эксплуатации онлайн [4/52] 297897

Warning

Before mounting, check that the wall you have chosen is suitable for the weight

to be mounted Also make sure that there are no electric, water, gas or other lines

running through the wall at the mounting site.

6. Operation

•After inserting a battery, all of the segments of the display will ash briey.

•The thermometer/hygrometer is now ready for use.

•After calibration, the top half of the display shows the measured temperature value,

while the bottom half of the display shows the measured air humidity value.

•If the measured value is outside of the measuring range, LL.L (value lower than

minimum) or HH.H (value higher than maximum) will appear on the temperature

display.

•Once the elements on the display begin to dim, replace the batteries as described in

4. Getting Started.

6.1. Celsius / Fahrenheit

•Press the °C/°F button to switch between °C and °F for the temperature display.

6.2. Maximum and minimum temperature and humidity values

•The thermometer/hygrometer automatically stores the maximum and minimum

temperature and humidity values.

•Repeatedly press the MAX/MIN button to switch between the current temperature

and humidity, minimum temperature and humidity (MIN) and maximum temperature

and humidity (MAX).

•The maximum and minimum values are automatically deleted every 24 hours.

6.3. Comfort display

The thermometer/hygrometer displays the following comfort ranges based on the ratio

between the current room temperature and room humidity: