Candy CCE 16 X-07 Серый [11/18] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Candy CCE 16 X-07 Серый [11/18] English

Candy CCE 16 X-07 Серый [11/18] English
- 11 -
ENGLISH
GB
GENERAL
1.1 Carefully read the following important information
regarding installation safety and maintenance. Keep this
information booklet accessible for further consultations. The
appliance has been designed for use in the ducting version (air
exhaust to the outside - Fig.1B), filtering version (air circulation
on the inside - Fig.1A) or with external motor (Fig.1C).
SAFETY PRECAUTION
2.1 Take care when the cooker hood is operating simultane-
ously with an open fireplace or burner that depend on the air
in the environment and are supplied by other than electrical
energy, as the cooker hood removes the air from the environ-
ment which a burner or fireplace need for combustion. The
negative pressure in the environment must not exceed 4Pa
(4x10-5 bar). Provide adequate ventilation in the environment
for a safe operation of the cooker hood. Follow the local laws
applicable for external air evacuation.
2.2 Beforeconnecting themodeltotheelectricitynet-
work:
- Control the data plate (positioned inside the appliance)
to ascertain that the voltage and power correspond to the
network and the socket is suitable. If in doubt ask a qualified
electrician.
- If the power supply cable is damaged, it must be replaced
with another cable or a special assembly, which may be
obtained direct from the manufacturer or from the Technical
Assistance Centre.
- This device must be connected to the supply network
through either a plug fused 3A or hardwired to a 2 fase spur
protected by 3A fuse.
2.3Warning!
Incertaincircumstanceselectricalappliancesmaybea
dangerhazard.
A)Donotcheckthestatusofthefilterswhilethecooker
hoodisoperating.
B)Donottouchbulbsoradjacentareas,duringorstraight
afterprolongeduseofthelightinginstallation.
C)Flambècookingisprohibitedunderneaththecooker
hood.
D)Avoidfreeflame,asitisdamagingforthefiltersanda
firehazard.
E)Constantlycheckfoodfryingtoavoidthattheover-
heatedoilmaybecomeafirehazard.
F)Disconnecttheelectricalplugpriortoanymaintenance.
G)Thisapplianceisnotintendedforusebyyoungchildren
orinfirmpersonswithoutsupervision.
H)Youngchildrenshouldbesupervisedtoensurethey
donotplaywiththeappliance.
I)Thereshallbeadequateventilationoftheroomwhen
therangehoodis usedatthesametimeasappliances
burninggasorotherfuels.
L)Thereisariskoffireifcleaningisnotcarriedoutin
accordancewiththeinstructions.
2.4 This appliance conforms to the European Directive
EC/2002/96, Waste Electrical and Electronic Equipment
(WEEE). By making sure that this appliance is disposed of in
a suitable manner, the user is helping to prevent potential
damage to the environment or to public health.
The symbol on the product or on the accompanying
paperwork indicates that the appliance should not be
treated as domestic waste, but should be delivered to
a suitable electric and electronic appliance recycling collection
point. Follow local guidelines when disposing of waste. For
more information on the treatment, re-use and recycling of
this product, please contact your local authority, domestic
waste collection service or the shop where the appliance was
purchased.
INSTALLATION INSTRUCTIONS
3.1 Assemblyandelectricalconnectionsmustbecarried
outbyspecialisedpersonnel.
3.2 Wear protectiveglovesbeforeproceedingwiththe
installation.
3.6 ElectricConnection:
Note! Verify the data label placed inside the appliance:
- If the symbol
appears on the plate, it means that no earth
connection must be made on the appliance, therefore follow
the instructions concerning insulation class II.
- If the symbol DOES NOT appear on the plate, follow the
instructions concerning insulation class I.
3.7 InsulationclassII
- The appliance has been manufactured as a class II, therefore
no earth cable is necessary. The plug must be easily accessible
after the installation of the appliance. If the appliance
is equipped with power cord without plug, a suitably
dimensioned omnipolar switch with 3 mm minimum opening
between contacts must be fitted between the appliance and
the electricity supply in compliance with the load and current
regulations.
- The connection to the mains is carried out as follows:
BROWN = L line
BLUE = N neutral.
3.8 InsulationclassI
This is a class I, appliance and must therefore be connected
to an effiecient earthing system.
- The appliance must be connected to the electricity supply
as follows:
BROWN = L line
BLUE = N neutral
YELLOW/GREEN =
earth.
The neutral wire must be connected to the terminal with the
N symbol while the YELLOW/GREEN, wire must be connected
to the terminal by the earth symbol
.
When connecting the appliance to the electricity supply,
make sure that the mains socket has an earth connection.
After fitting the ducted cooker hood, make sure that the
electrical plug is in a position where it can be accessed easily.
If the appliance is connected directly to the electricity supply,
an omnipolar switch with a minimum contact opening of
3 mm must be placed in between the two; its size must
be suitable for the load required and it must comply with
current legislation.
3.4 If the hob is electric, gas, or induction, the minimum
distance between the same and the lower part of the hood
must be at least
65cm. If a connection tube composed of two
parts is used, the upper part must be placed outside the lower
part. Do not connect the cooker hood exhaust to the same
conductor used to circulate hot air or for evacuating fumes
from other appliances generated by other than an electrical

Содержание

Похожие устройства

Скачать