Zigmund & Shtain CNS 249.60 WX Инструкция по эксплуатации онлайн [20/64] 300888

O = Heating plate with active timer function indicator.

Cooktop Ignition:

- Verify that "B1" led is o before turning the equipment on;

otherwise, turn it o by pressing the "B" key button for ap-

proximately 2 seconds.

- Next, select the "A" button.

- All "G" displays will show a ‘0’ for about 10 seconds. If no

action is taken during this period, the cooktop will go o.

Heating Plate Ignition:

- A heating plate can be turned on by selecting one of the "E"

buttons. A blinking zero will appear on the display.

- Use "+" or "-" buttons to regulate the power level. If the "+"

button is selected, the display will show power level 1. If the

"-" button is selected, the display will show power level 9.

- After this, power level can be regulated by pressing the "+"

or "-" buttons.

Turning o the heating Plate:

- Select the appropriate heating plate by pressing the "E" but-

ton. The display will start blinking.

- Use the "-" button to set power level to zero.

- Select the heating plate by pressing the "E" button and the

display will start blinking.

- Press the "+" and "-" buttons simultaneously.

You can turn o all the heating zones simultaneously by

pressing the ON/OFF button.

Double Plate Function:

- The double plate function is only activated, depending on

the model, on the "E1-E3" heating plates.

- Select and adjust the power level as described in "Heating

Plates Ignition" section.

- Select the "F" button.

- After activating the double plate, a "F1-F3" xed led will ap-

pear near the display of the previously selected plate.

To deactivate this function, follow the instructions below:

- Select the plate using the "E1-E3" button.

- Press the "F" button to deactivate this function. The "F1-F3"

led will go o at the same time.

Triple Plate Function:

- The triple plate function is only activated, depending on the

model, in the "E3" heating plates.

- Select and adjust the power level as described in the "Heating

Plates Ignition" section.

- Select the "F" button.

- After activating the triple plate, an "F3" blinking led will ap-

pear near its corresponding display.

- Select the "F" button again to activate the triple plate.

- At this point the "F3" led will be xed.

To deactivate this function, follow the instructions below:

- Select the plate using the "E3" button.

- Press the "F" button to deactivate this function, and the led

near the display starts blinking.

- Next the double heating zone will operate again.

Residual Heat Function:

- When the "E" heating plate is in position ‘OFF’, and the glass

surface temperature is above 50 ºC, a light indicator appears

on the "G" display of the heating plate:

1) If other plates are still operating, the display shows an

alternating "0" and "H";

2) When the equipment is in the ‘OFF’ position, the display

shows a xed "H".

Key Function (Fig.4B):

To prevent children or people- requiring supervision- from

using the cooktop, all functions can be blocked with the

"B" button.

To activate or deactivate, press the "B" button for approxi-

mately 2 seconds. The function is activated when the "B1"

indicator is turned on.

If the appliance is on and the key function is activated, the

ON/OFF button works in the same way.

O.S.D.(Overow Safety Device) (Fig.4):

The cooktop has a safety system that turns all the plates OFF

and activates the safety lock if any liquid or objects are found

on the control area.

The cooktop goes o automatically.

HEAT UP:

The Heat Up function allows the heating plate to be at

maximum temperature for a certain period of time; then, the

temperature drops to a lower selected value.

HEAT UP activation:

- Select the heating zone using the "E" button.

- Set power level to 9.

- Select the "+" button again.

- A "•" decimal point will appear on the display, near the power

level, for about 5 seconds. During this period select the desired

power level -between 1 and 8- to be reached within a short

period of time.

- If you select power level 9 the function will be cancelled.

- When the heat up function is activated, it is possible to raise

the temperature level selected before.

- When the function is over, an acoustic BEEP signal is heard.

After the acoustic signal, the appliance will continue working

with the power level set beforehand.

HEAT UP deactivation:

- Select the heating zone using the "E" button.

- Set power level to 9.

- When the "•" decimal point on the display disappears, the

function is deactivated.

TIMER (Fig.4T):

This function sets the auto turn-o time (from 1 to 99 minutes)

for the selected heating plates.

Note: The Timer can be simultaneously activated in all the

heating plates.

- Select the "E" heating plate.

- Set the power level, from 1 to 9, by pressing the "+" and "-"

buttons.

- Select the "F" timer button.

- The "O" plates indication led will start blinking.

- Set the desired time using the "+" and "-" buttons.

- After some seconds, the time set will be xed on the "N"

display and the remaining time will be shown.

- When the time set before is over, the "N" timer display and

the "O" plates indicator will start blinking followed by an

acoustic signal. This indicates that the time set is over and

that the heating zone is o.

- If the timer is activated simultaneously in more plates, the

minimum residual time will appear on the display with the

corresponding heating zone blinking led.

- To deactivate the acoustic signal, press the "T" timer button;

otherwise, it will be automatically o after about 1 minute.

- To deactivate the blinking light indicator, press the "T" timer

button.

To deactivate the timer function before the set time, follow

the instructions below:

- Select the "E" heating zone.

- 20 -

Zigmund & Shtain CNS 249.60 WX Инструкция по эксплуатации онлайн [20/64] 300888

Содержание

Похожие устройства