Hoover Athen Evo ATV252RM 019 39400265 [8/15] Cleaner maintenance

CLEANER MAINTENANCE

Emptying the Dust Container

1. Press the dust container release button and pull the dustbin forwards to remove it from the main body of the cleaner.

[7]

2. Hold the unit over a bin and push the bin empty slider to empty the dust container. [8]

3. Return the dust container to the cleaner main body. [9]

Cleaning the Filters

1. Press the dust container release button and pull the dust bin forwards to remove it from the main body of the cleaner.

[7]

2. Pull the lter and shroud assembly from the dust bin using the grips on the lter frame. [10]

3. Twist the lter anticlockwise to remove it from the shroud. [10]

4. Wash the lter in lukewarm water and leave to dry for 24 hours. Once thoroughly dry reassemble to the shroud and

dustbin. [11]

5. If required, wash the dustbin in lukewarm water. Ensure it is fully dry before returning to the main body of the cleaner.

6. Return the dust container to the cleaner main body. [9]

NOTE: Do not use hot water or detergents when cleaning the lters. In the unlikely event of the lters becoming damaged,

t a genuine Hoover replacement. Do not try and use the product without a lter tted.

IMPORTANT: For optimum performance, always keep your lter clean. We recommend that the lter should be washed

on a regular basis.

Changing and Cleaning the Agitator

IMPORTANT: Always switch off the cleaner before changing or cleaning the agitator.

1. Detach the agitator release ap. It is positioned on the lateral part of the nozzle. [12]

2. Hold the agitator release ap and pull down to remove the agitator. [12]

3. Replace with new Agitator or clean it . This can only t in one direction.

4. Re – t in position the agitator release ap.

Battery Replacement

For reasons of safety the batteries in this cleaner are only replaceable by a Hoover Service engineer. When the batteries

fail to maintain charge, please contact the Hoover Customer Service Centre to arrange a replacement.

End of Product Life Battery Disposal

If the cleaner is to be disposed of the batteries should be removed. Used batteries should be taken to a recycling station

and not disposed of with household waste. To remove the batteries, please contact the Hoover Customer Centre or

proceed according to the following instructions:

IMPORTANT: Always fully discharge the batteries before removal.

1. Run the cleaner until the batteries are completely empty.

2. Remove the ergonomic handle and the screws, in the main body to open the cleaner.

3. Remove the motor battery housing and disconnect the cables.

4. Remove the batteries from the housing.

NOTE: Should you experience any difculties in dismantling the unit or for more detailed information about treatment,

recovery and recycling of this product, please contact your local city ofce or your household waste disposal service.

* Certain Models Only

48019235 Athen Evo IM ML with Li-ion batterry GB RU.indd 6 2016/3/1 �� 5:02:29