Kuppersberg FV9TGRZ C GOLD БЕЖЕВЫЙ [11/44] Adjustment of hob per gas types

Kuppersberg FV9TGRZ C GOLD БЕЖЕВЫЙ [11/44] Adjustment of hob per gas types

11

 



conical-cylindrical or cylindrical

cylindrical components,

2. Tighten connection place with the

keys so that the pipes will be in proper

position,

3. Attach C coupling to the main gas

source by using hard copper pipe or

exible steel pipe.

WARNING; Final Check whether

any leakage exists at the pipes with a

solution with a soap, and do not ever

use ame.

6.5. ADJUSTMENT OF HOB

PER GAS TYPES

These instructions are prepared for

specialist personnel having required

competence, the installation of the

equipment should be suitable as per

the applicable standards.

Â All gas related works should be

conducted when the electric connection

was cut.

dened in the user’s manual. Conduct

the works with a plain tip screwdriver

at a position to see valve setting screw

by removing the switches of the hob

and rubber seals. In order to set the

low ame level, turn the gas setting

screw on the valve to have minimum

gas setting ow. Do this setting after

installing the burner component of the

burner, burning the burner and bringing

the switch setting to minimum.

Flow setting screw should be

tightened in LPG conversions as it

should be released for conversion from

LPG to natural gas.

After realization of the hob,

complete the conversion transaction

by connecting the rubber seals and

switched in the same order.

These instructions should be

used by an authorized service. The

products should be installed as per

the regulations in force and in proper

manner. Before conducting any

transaction the electrical connections

of the hob should be cut by no means.

The type label on the hob indicates

the gas type planned to be used with

the unit.

6.6. STARTING THE APPLIANCE

FIRING OF BURNER

If your hob does not have built in

lighter or during black out place the

naked ame over the burner and push

the switch to bring it to the desired

position with counter-clockwise

movement. Gas adjustment should

be between maximum and minimum

In order to convert the hob, remove

the burner plates and ame circles

thereon. Replace the injectors as per

the followings, and change them with

the injectors with suitable diameters

Содержание

Похожие устройства