Timberk Cloud TAP FL150 SF (W) [6/24] Www timberk com electric air purifier

Timberk Cloud TAP FL150 SF (W) [6/24] Www timberk com electric air purifier
www.timberk.com • electric air purifier
6
CAUTION:
• Do not touch the glass part of the lamp. Oil from
fingertips will decrease the effectiveness of the lamp.
• Never operate the unit without a filter or with a
damaged filter. UV lamp cover must be installed at
all times. The UV light from the UV lamp will result in
severe damage to eyes and could cause blindness.
Term reliability is 5 years.
At the end of the life of the puripier should be subjected to disposal in
accordance the rules, regulations and methods, at the place of disposal.
10. UTILIZATION
11. TRANSPORTATION AND STORAGE
1. When transporting, any possible impacts and movements of the
package inside a vehicle must be avoided.
2. Handling symbols on the unit’s package must be strictly observed when
transporting and storing it.
3.
Temperature
requirements*
Humidity
requirements*
Transportation and
storage
-30°C to +50°C
15% to 85%
(no condensate)
We are researching new technologies and constantly improving the quality
of our products. Specifications, design and scope of delivery may be
changed without any prior notice.
* Products must be stored in dry, ventilated storages at the temperature
not lower than -30°C.
is done. Exposing the TAP FL150 SF to candle/oil/fireplace soot and smoke
is not recommended and will require more frequent cleaning.
Cleaning External Surfaces
1. Turn off and unplug unit.
2. Use a washcloth slightly dampened with a little water and dishwashing
soap to wipe the outer case surfaces.
3. Do not allow water to slip into the internal parts as this could damage
your unit and result in electrical shock and injury to you.
4. Allow the unit to thoroughly dry before use.
UV Lamp
The lifetime of the UV lamp is up to 12 months of continuous, effective
operation. After this time, the bulb may remain illuminated, but its
effectiveness is greatly reduced. For maximum germicidal protection,
please replace the UV bulb annually.
In case of emergency contact information listed in the table 2 below. If you
can not solve problems independently, to a service center.
9. TROUBLESHOOTING
Table 2
Problem Possible cause
Unit will not operate
Power button has not been turned on Press the Power button
Unit is unplugged Check to ensure unit is plugged in
The inlet grill has not been installed &
locked into place
Check to make sure filter is properly
installed & locked into place
Problem Possible cause
Reduced airflow or poor filtering
The inlet or outlet grill may be blocked
Check to ensure nothing is blocking air
inlet & air outlet
Permanent filter may be clogged Check & clean filter, if necessary
No visible light in the UV light
view window
UV button is not turned on Check that the UV button is turned on
UV lamp is broken Replace the UV lamp

Содержание

Похожие устройства

Скачать