Hitachi DS18DFLRL [12/106] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Hitachi DS18DFLRL [12/106] English

Hitachi DS18DFLRL [12/106] English
English
11
Temperatures at which the
Rechargeable batteries
battery can be recharged
BCL1415, BCL1430, EBL1430,
BCL1815, EBM1830
0°C – 50°C
Table 4
Indications of the lamp
Before Blinks Lights for 0.5 seconds. Does not light
charging for 0.5 seconds. (off for 0.5 seconds)
Lights Lights continuously
Blinks Lights for 0.5 seconds. Does not light
for 0.5 seconds. (off for 0.5 seconds)
Blinks Lights for 1 second. Does not light
for 0.5 seconds. (off for 0.5 seconds)
Overheat
standby
While
charging
Charging
complete
Battery overheated.
Unable to charge.
(Charging will
commence when
battery cools)
Pilot lamp
(red)
constituting the cause of the failures. Once the
charging has been completed, give 15 minutes rest
until the next charging.
䡬 If the battery is recharged when it is warm due to
battery use or exposure to sunlight, the pilot lamp
map light in green.
The battery will not be recharged. In such a case,
let the battery cool before charging.
䡬 When the pilot lamp flickers in red (at 0.2-second
intervals), check for and take out any foreign objects
in the charger’s battery installation hole. If there are
no foreign objects, it is probable that the battery
or charger is malfunctioning. Take it to your
authorized Service Center.
<UC18YGL2>
Before using the driver drill, charge the battery as follows.
1. Connect the charger’s power cord to the receptacle.
When connecting the plug of the charger to a
receptacle, the pilot lamp will blink in red
(At 1-second intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger till it
contacts the bottom of the charger and checking
the polarities as shown in Fig. 4.
CAUTION:
䡬 If the batteries are inserted in the reverse direction,
not only recharging will become impossible, but it
may also cause problems in the charger such as
a deformed recharging terminal.
3. Charging
When inserting a battery in the charger, the pilot
lamp will light up continuously in red.
When the battery becomes fully recharged, the pilot
lamp will blink in red (At 1-second intervals).
(See Table 4)
(1) Lamp indication
The indications of the lamp will be as shown in
Table 4, according to the condition of the charger
or the rechargeable battery.
(2) Regarding the temperatures of the rechargeable
battery
The temperatures for rechargeable batteries are as
shown in Table 5, and batteries that have become
hot should be cooled for a while before being
recharged.
Table 5 Recharging ranges of batteries
(3) Regarding recharging time
Depending on the combination of the charger and
batteries, the charging time will become as shown
in Table 6.
Table 6 Charging time (At 20°C)
NOTE
The charging time may vary according to
temperature and power source voltage.
4. Disconnect the charger’s power cord from the
receptacle
5. Hold the charger firmly and pull out the battery
NOTE
After charging, pull out batteries from the charger
first, and then keep the batteries properly.
How to make the batteries perform longer.
(1) Recharge the batteries before they become
completely exhausted.
When you feel that the power of the tool becomes
weaker, stop using the tool and recharge its battery.
If you continue to use the tool and exhaust the
electric current, the battery may be damaged and
its life will become shorter.
(2) Avoid recharging at high temperatures.
A rechargeable battery will be hot immediately after
use. If such a battery is recharged immediately after
use, its internal chemical substance will deteriorate,
and the battery life will be shortened. Leave the
battery and recharge it after it has cooled for a while.
Charger
UC18YGL2
Battery
BCL1415, BCL1815 Approx.
40 min.
BCL1430, EBL1430,
Approx.
90 min.
EBM1830
01Eng_DS14DFL_EE 4/30/10, 15:2411

Содержание

Похожие устройства

English constituting the cause of the failures Once the charging has been completed give 15 minutes rest until the next charging O If the battery is recharged when it is warm due to battery use or exposure to sunlight the pilot lamp map light in green The battery will not be recharged In such a case let the battery cool before charging O When the pilot lamp flickers in red at 0 2 second intervals check for and take out any foreign objects in the charger s battery installation hole If there are no foreign objects it is probable that the battery or charger is malfunctioning Take it to your authorized Service Center UC18YGL2 Before using the driver drill charge the battery as follows 1 Connect the charger s power cord to the receptacle When connecting the plug of the charger to a receptacle the pilot lamp will blink in red At 1 second intervals 2 Insert the battery into the charger Firmly insert the battery into the charger till it contacts the bottom of the charger and checking the polarities as shown in Fig 4 CAUTION O If the batteries are inserted in the reverse direction not only recharging will become impossible but it may also cause problems in the charger such as a deformed recharging terminal 3 Charging When inserting a battery in the charger the pilot lamp will light up continuously in red When the battery becomes fully recharged the pilot lamp will blink in red At 1 second intervals See Table 4 1 Lamp indication The indications of the lamp will be as shown in Table 4 according to the condition of the charger or the rechargeable battery Table 4 Indications of the lamp Pilot lamp red 2 Before charging Blinks jghts for 0 5 seconds Does not light dr 0 5 seconds off for 0 5 seconds While charging Lights jghts continuously Charging complete Blinks jghts for 0 5 seconds Does not light dr 0 5 seconds off for 0 5 seconds Overheat standby Blinks jghts for 1 second Does not light or 0 5 seconds off for 0 5 seconds Regarding the temperatures of the rechargeable batte ry The temperatures for rechargeable batteries are as shown in Table 5 and batteries that have become hot should be cooled for a while before being recharged Table 5 Recharging ranges of batteries Rechargeable batteries Temperatures at which the battery can be recharged BCL1415 BCL1430 EBL1430 BCL1815 EBM1830 0 C 50 C 3 Regarding recharging time Depending on the combination of the charger and batteries the charging time will become as shown in Table 6 Table 6 Charging time At 20 C _Charger Batte ry UC18YGL2 BCL1415 BCL1815 Approx 40 min BCL1430 EBL1430 EBM1830 Approx 90 min 11 Battery overheated Unable to charge Charging will commence when battery cools NOTE The charging time may vary according to temperature and power source voltage 4 Disconnect the charger s power cord from the receptacle 5 Hold the charger firmly and pull out the battery NOTE After charging pull out batteries from the charger first and then keep the batteries properly How to make the batteries perform longer 1 Recharge the batteries before they become completely exhausted When you feel that the power of the tool becomes weaker stop using the tool and recharge its battery If you continue to use the tool and exhaust the electric current the battery may be damaged and its life will become shorter 2 Avoid recharging at high temperatures A rechargeable battery will be hot immediately after use If such a battery is recharged immediately after use its internal chemical substance will deteriorate and the battery life will be shortened Leave the battery and recharge it after it has cooled for a while

Скачать