Home
Главная
AEG
Сетевая циркулярная пила
KS552 4935446665
Инструкция по эксплуатации Страница: 16

AEG KS552 4935446665 [16/100] English

TECHNICAL DATA

Circular saw

KS 55-2

Production code 4466 66 02 ...

... 000001-999999

Rated input 1200 W

No-load speed 6100 min

-1

Saw blade dia. x hole dia 165 x 20 mm

Saw blade thickness 1,6 mm

Max. Cutting depth at 0° / 45° / 50° 54 / 41 / 38 mm

Weight according EPTA-Procedure 01/2003 3,3 kg

Noise information

Measured values determined according to EN 60745. Typically, the

A-weighted noise levels of the tool are:

Sound pressure level (Uncertainty K=3dB(A)) 92 dB(A)

Sound power level (Uncertainty K=3dB(A)) 103 dB(A)

Wear ear protectors!

Vibration information

Vibration total values (triaxial vector sum) determined according

to EN 60745

Sawing of wood

Vibration emission value a

h,W

4,5 m/s

Uncertainty K= 1,5 m/s

WARNING!

The vibration emission level given in this information sheet has

been measured in accordance with a standardised test given in EN

60745 and may be used to compare one tool with another. It may be

used for a preliminary assessment of exposure.

The declared vibration emission level represents the main applica-

tions of the tool. However if the tool is used for dierent applica-

tions, with dierent accessories or poorly maintained, the vibration

emission may dier. This may signicantly increase the exposure

level over the total working period.

An estimation of the level of exposure to vibration should also

take into account the times when the tool is switched o or when

it is running but not actually doing the job. This may signicantly

reduce the exposure level over the total working period.

Identify additional safety measures to protect the operator from

the eects of vibration such as: maintain the tool and the acces-

sories, keep the hands warm, organisation of work patterns.

WARNING!

Read all safety warnings, instructions, illustrations and

specications provided with this device.Failure to follow the

warnings and instructions may result in electric shock, re and/or

serious injury.

Save all warnings and instructions for future reference.

CIRCULAR SAW SAFETY WARNINGS

Cutting procedures

DANGER: Keep hands away from cutting area and

the blade. Keep your second hand on auxiliary handle, or

motor housing. If both hands are holding the saw, they cannot be

cut by the blade.

b) Do not reach underneath the workpiece. The guard cannot

protect you from the blade below the workpiece.

c) Adjust the cutting depth to the thickness of the work-

piece. Less than a full tooth of the blade teeth should be visible

below the workpiece.

d) Never hold the workpiece in your hands or across

your leg while cutting. Secure the workpiece to a stable

platform. It is important to support the work properly to minimise

body exposure, blade binding, or loss of control.

e) Hold the power tool by insulated gripping surfaces,

when performing an operation where the cutting tool may

contact hidden wiring or its own cord. Contact with a "live"

wire will also make exposed metal parts of the power tool "live"

and could give the operator an electric shock.

f) When ripping, always use a rip fence or straight edge

guide. This improves the accuracy of cut and reduces the chance

of blade binding.

g) Always use blades with correct size and shape (diamond

versus round) of arbour holes. Blades that do not match the

mounting hardware of the saw will run o-centre, causing loss of

control.

h) Never use damaged or incorrect blade washers or bolt.

The blade washers and bolt were specially designed for your saw,

for optimum performance and safety of operation.

Kickback causes and related warnings

– kickback is a sudden reaction to a pinched, jammed or misaligned

saw blade, causing an uncontrolled saw to lift up and out of the

workpiece toward the operator;

– when the blade is pinched or jammed tightly by the kerf closing

down, the blade stalls and the motor reaction drives the unit

rapidly back toward the operator;

– if the blade becomes twisted or misaligned in the cut, the teeth

at the back edge of the blade can dig into the top surface of the

wood causing the blade to climb out of the kerf and jump back

toward the operator.

Kickback is the result of saw misuse and/or incorrect operating

procedures or conditions and can be avoided by taking proper

precautions as given below.

a) Maintain a rm grip with both hands on the saw and

position your arms to resist kickback forces. Position your

body to either side of the blade, but not in line with the

blade. Kickback could cause the saw to jump backwards, but kick-

back forces can be controlled by the operator, if proper precautions

are taken.

b) When blade is binding, or when interrupting a cut for

any reason, release the trigger and hold the saw motionless

in the material until the blade comes to a complete stop.

Never attempt to remove the saw from the work or pull the

saw backward while the blade is in motion or kickback may

occur.Investigate and take corrective actions to eliminate the cause

of blade binding.

c) When restarting a saw in the workpiece, centre the saw

blade in the kerf so that the saw teeth are not engaged into

the material. If a saw blade binds, it may walk up or kickback from

the workpiece as the saw is restarted.

d) Support large panels to minimise the risk of blade

pinching and kickback.Large panels tend to sag under their own

weight. Supports must be placed under the panel on both sides,

near the line of cut and near the edge of the panel.

e) Do not use dull or damaged blades. Unsharpened or impro-

perly set blades produce narrow kerf causing excessive friction,

blade binding and kickback.

English

AEG KS552 4935446665 [16/100] English

Содержание

Похожие устройства