AEG US400XE 4935411814 [8/65] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

AEG US400XE 4935411814 [8/65] English

AEG US400XE 4935411814 [8/65] English
6
GB
TECHNICAL DATA
Reciprocating Saw
US 400 XE
Production code 4103 86 02...
4118 11 02...
... 000001-999999
Rated input 400 W
Stroke rate under no-load 0-3500 min
-1
Lengths of stroke 13 mm
Weight according EPTA-Procedure 01/2003 1,7 kg
Noise information
Measured values determined according to EN 60745. Typically,
the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty
K=3dB(A))
83 dB(A)
Sound power level (Uncertainty K=3dB(A)) 94 dB(A)
Wear ear protectors!
Vibration information
Vibration total values (triaxial vector sum) determined according
to EN 60745
Cutting boards
Vibration emission value a
h, B
Uncertainty K=
18,3 m/s
2
1,5 m/s
2
Cutting wooden beams
Vibration emission value a
h, WB
Uncertainty K=
18,4 m/s
2
1,5 m/s
2
WARNING!
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 60745
and may be used to compare one tool with another. It may be used
for a preliminary assessment of exposure.
The declared vibration emission level represents the main applica-
tions of the tool. However if the tool is used for dierent applications,
with dierent accessories or poorly maintained, the vibration
emission may dier. This may signicantly increase the exposure level
over the total working period.
An estimation of the level of exposure to vibration should also take
into account the times when the tool is switched o or when it is
running but not actually doing the job. This may signicantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the operator from the
eects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.
WARNING! Read all safety warnings and all instruc-
tions. Failure to follow the warnings and instructions may result in
electric shock, re and/or serious injury. Save all warnings and
instructions for future reference.
SABRE SAW SAFETY WARNINGS
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring or its own cord. Cutting accessory con-
tacting a “live” wire may make exposed metal parts of the power
tool “live” and could give the operator an electric shock.
Use protective equipment. Always wear safety glasses when
working with the machine. The use of protective clothing is re-
commended, such as dust mask, protective gloves, sturdy non-slip
footwear, helmet and ear defenders.
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Use a dust absorption system and wear a
suitable dust protection mask. Remove deposited dust thoroughly,
e.g. with a vacuum cleaner.
Do not reach into the machine while it is running. Chips and splin-
ters must not be removed while the machine is running.
Always use the protective shields on the machine.
Do not use cracked or distorted saw blades.
Plunge cuts without pre-drilling a hole are possible with soft ma-
terials (wood, light building materials for walls). Harder materials
(metals) must rst be drilled with a hole corresponding to the size
of the saw blade.
Always place the guide shoe on the workpiece when sawing.
Clamp your workpiece with a clamping device. Unclamped workpie-
ces can cause severe injury and damage.
To avoid unintended start of the product, place down tool only on
even surfaces.
Do not machine any materials that present a danger to health (e.g.
asbestos).
Switch the device o immediately if the insertion tool stalls! Do
not switch the device on again while the insertion tool is stalled,
as doing so could trigger a sudden recoil with a high reactive force.
Determine why the insertion tool stalled and rectify this, paying
heed to the safety instructions.
Possible causes can be:
• it is tilted in the workpiece to be machined
• breakage of the material to be used
• the power tool is overloaded
WARNING! Danger of burns
The insertion tool may become hot during use.
• when changing tools
• when setting the device down
Do not let any metal parts enter the airing slots - danger of short
circuit!
Always disconnect the plug from the socket before carrying out any
work on the machine.
MAINS CONNECTION
Connect only to single-phase AC system voltage as indicated on
the rating plate. It is also possible to connect to sockets without an
earthing contact as the design conforms to safety class II.
Appliances used at many dierent locations including wet room
and open air must be connected via a residual current device (FI,
RCD, PRCD) of 30mA or less.
Only plug-in when machine is switched o.
Keep mains lead clear from working range of the machine. Always
lead the cable away behind you.
SPECIFIED CONDITIONS OF USE
This sabre cut is intended to cut wood, plastic, and metal. It can cut
straight lines, curves, and internal cut-outs. It cuts pipes and can
cut ush to a surface.
English

Содержание

Похожие устройства

Скачать