![Axis 216FD-V [2/69] Europe](/img/pdf.png)
Axis 216FD-V [2/69] Europe
![Axis 216FD-V [2/69] Europe](/views2/1372508/page2/bg2.png)
AXIS COMMUNICATIONS
<Product Name> Quick User’s Guide
About this Document
This manual is intended for administrators and users of the AXIS
216FD/AXIS 216FD-V/AXIS 216MFD/AXIS 216MFD-V Network
Camera, and is applicable for software release 4.47 and later. It
includes instructions for using and managing the camera on your
network. Previous experience of networking will be of use when
using this product. Some knowledge of UNIX or Linux-based
systems may also be beneficial, for developing shell scripts and
applications. Later versions of this document will be posted to the
Axis website. See also the product’s online help, available via the
web-based interface.
Safety Notices Used In This Manual
Caution! - Indicates potential hazard that can damage the product.
Important! -
Indicates hazard that can seriously impair operation.
Do not proceed beyond any of the above notices until you have
fully understood the implications.
Intellectual Property Rights
Axis AB has intellectual property rights relating to technology in
the product described in this document. In particular, and without
limitation, these intellectual property rights may include one or
more of the patents listed at http://www.axis.com/patent.htm and
one or more additional patents or pending patent applications in the
US and other countries.
This product contains licensed third-party software. See the menu
i
tem “About” in the product’s user interface for more information.
This product contains source code copyright Apple Computer, Inc.,
un
der the terms of Apple Public Source License 2.0 (see
http://www.opensource.apple.com/apsl/). The source code is
available at: http://developer.apple.com/darwin/projects/bonjour/
Legal Considerations
Video and audio surveillance can be prohibited by laws that vary
from country to country. Check the laws in your local region before
using this product for surveillance purposes.
This product includes one (1) MPEG-4 decoder license. To purchase
furt
her licenses, contact your reseller.
Electromagnetic Compatibility (EMC)
This equipment generates, uses and can radiate radio frequency
energy; if not installed and used in accordance with instructions,
may cause harmful interference to radio communications. There is
no guarantee against interference in particular installations.
If this equipment causes
harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to correct the interference by one or
more of the following measures: Re-orient or relocate the receiving
antenna. Increase the separation between the equipment and
receiver. Connect the equipment to an outlet on a different circuit to
the receiver. Consult your dealer or an experienced radio/TV
technician for help. Shielded (STP) network cables must be used
with this unit to ensure compliance with EMC standards.
USA - This equipment has been tested and found to comply with
the limits for a Class B computing device pursuant to Subpart B of
Part 15 of FCC rules, which are designed to provide reasonable
protection against such interference when operated in a commercial
environment. Operation of this equipment in a residential area is
likely to cause interference, in which case the user at his/her own
expense will be required to take whatever measures may be required
to correct the interference.
Canada - This Class B digital apparatus complies with Canadian
ICES-003.
Europe - This digital equipment fulfills the requirements for
radiated emission according to limit B of EN55022, and the
re
quirements for immunity according to EN55024 residential,
commercial, and light industry.
Japan - This is a class B product based on the standard of the
Voluntary Control Council for Interference from Information
Technology Equipment (VCCI). If used near a radio or television
receiver in a domestic environment, it may cause radio interference.
Install and use the equipment according to the instruction manual.
Australia - This electronic device meets the requirements of the
Radio communications (Electromagnetic Compatibility) Standard
AS/NZS CISPR22:2002.
Equipment Modifications
This equipment must be installed and used in strict accordance with the
instructions in the user documentation. This equipment contains no
user-serviceable components. Unauthorized equipment changes or
modifications will invalidate all applicable regulatory certifications and
approvals.
Liability
Every care has been taken in the preparation of this manual. Please
inform your local Axis office of inaccuracies or omissions. Axis
Communications AB cannot be held responsible for technical or
typographical errors and reserves the right to make changes to the
product and manuals without prior notice. Axis Communications AB
makes no warranty of any kind with regard to the material contained
within this document, including, but not limited to, the implied
warranties of merchantability and fitness for a particular purpose. Axis
Communications AB shall not be liable nor responsible for incidental or
consequential damages in connection with the furnishing, performance
or use of this material.
Trademark Acknowledgments
Apple, Boa, Bonjour, Ethernet, Internet Explorer, Linux, Microsoft,
Firefox, Netscape Navigator, OS/2, Real, QuickTime, UNIX, Windows,
WWW are registered trademarks of the respective holders. Java and
Java-based trademarks and logos are trademarks or registered
trademarks of Sun Microsystems, Inc. in the United States and other
countries. Axis Communications AB is independent of Sun Microsystems
Inc. UPnP
TM
is a certification mark of the UPnP
TM
Implementers
Corporation.
Support
Should you require technical assistance, contact your Axis reseller. If
your questions cannot be answered immediately, your reseller will
forward your queries to appropriate channels to ensure rapid response. If
you are connected to the Internet, you can:
• download user documentation and firmware updates
• find answers in FAQ database. Search by product, category, or phrases
• report problems to Axis by logging in to your private support area
• visit Axis Support at www.axis.com/techsup/
Safety Notice - Battery Replacement
The AXIS 216FD/FD-V/MFD/MFD-V uses a 3.0V CR2032 Lithium battery
as the power supply for its internal real-time clock (RTC). Under normal
conditions this battery lasts for a minimum of 5 years. Low battery
power affects the operation of the RTC, causing it to reset at every
power-up. A log message appears when the battery needs replacing.
The battery should not be replaced unless required! If the battery does
ne
ed replacing, please observe the following:
• Danger of Explosion if battery is incorrectly replaced
• Replace with same or equivalent battery, as recommended by
manuf
acturer.
Dispose of used batteries according to
the manufacturer's instructions.
RoHS
This product complies with both the European RoHS directive,
2002/95/EC, and the Chinese RoHS regulations, ACPEIP.
WEEE Directive
The European Union has enacted a Directive 2002/96/EC on
Waste Electrical and Electronic Equipment (WEEE Directive).
This directive is applicable in the European Union member
states.
The WEEE marking on this product (see right) or its
do
cumentation indicates that the product must not be disposed of
together with household waste. To prevent possible harm to human
health and/or the environment, the product must be disposed of in an
approved and environmentally safe recycling process. For further
information on how to dispose of this product correctly, contact the
product supplier, or the local authority responsible for waste disposal in
your area.
Business users should contact the product supplier for information on
ho
w to dispose of this product correctly. This product should not be
mixed with other commercial waste.
AXIS 216FD/FD-V/MFD/MFD-V User’s
Manual Rev 7.0
March 2008 Part number 31117
Copyright© Axis Communications AB, 2007-2008
Содержание
- About this document 2
- Australia 2
- Axis communications 2
- Canada 2
- Electromagnetic compatibility emc 2
- Equipment modifications 2
- Europe 2
- Intellectual property rights 2
- Legal considerations 2
- Liability 2
- Quick user s guide 2
- Safety notice battery replacement 2
- Safety notices used in this manual 2
- Support 2
- Trademark acknowledgments 2
- Weee directive 2
- Contents 3
- Product overview 5
- Axis 216fd fd v mfd mfd v product overview 6
- I o connector the i o terminal connector provides the physical interface to one transistor output one digital input and an auxiliary connection point for dc power for more information see the i o terminal connector on page 47 6
- Microphone built in microphone this can be disabled by inserting a plug in the audio in connector 6
- Network camera overview 6
- Network connector the camera connects to the network via a standard network connector supporting nway the camera detects the speed of the local network segment 10baset 100basetx ethernet supporting poe power over ethernet the camera can be powered directly from the network cabling 6
- Power connector for connection of the ps h power adapter included 6
- Audio in a 3 mm input for a mono microphone or for a line in mono signal a stereo signal from line in uses the left channel 7
- Audio out audio output line level which can be connected to a public address pa system or an active speaker with a built in amplifier a pair of headphones can also be attached a stereo connector must be used for the audio out 7
- Axis 216fd fd v mfd mfd v product overview 7
- Axis internet dynamic dns service is free service from axis that allows you to quickly and simply install your camera this requires an internet connection with no http proxy see www axiscam net for more information 7
- Control button press this button to install the camera using the axis internet dynamic dns service or to restore the factory default settings as described in resetting to the factory default settings on page 46 7
- Led indicators 7
- Serial number label the serial number may be required during installation 7
- Access from a browser 8
- Accessing the camera 8
- Setting the root password 9
- Setting the root password over a secure connection 10
- Access from the internet 11
- The live view page 12
- Amc negotiates with the camera to determine the transport protocol to use in the order listed above this order can be changed and the options disabled to suit specific requirements 14
- Axis 216fd fd v mfd mfd v video streams 14
- Deciding which combination of protocols and methods to use depends on your viewing requirements and on the properties of your network the available options in amc are 14
- How to stream mpeg 4 14
- Important 14
- Mpeg 4 is licensed technology the network camera includes one viewing client license installing additional unlicensed copies of the viewing client is prohibited to purchase additional licenses contact your axis reseller 14
- The live view page in the network camera provides access to mpeg 4 and motion jpeg video streams and to single jpeg images other applications and clients can also access these video streams images directly without going via the live view page 14
- The network camera provides several image and video stream formats your requirements and the properties of your network will determine the type you use 14
- This video compression standard makes good use of bandwidth and can provide high quality video streams at less than 1 mbit s note that the image settings of the mpeg 4 stream are the same for all clients 14
- Video streams 14
- Alternative methods of accessing the video stream 15
- Motion jpeg 15
- Mpeg 4 clients 15
- Configuration video image settings 17
- Overlay mask 18
- Advanced 19
- Camera settings 19
- Mpeg 4 20
- Axis 216fd fd v mfd mfd v audio 21
- The network camera can transmit audio to other clients using either the built in microphone or a connected external microphone and can play audio received from other clients via a connected speaker 21
- Audio settings 22
- Layout 24
- Live view config 24
- Default video format 25
- The custom settings window 25
- Action buttons 26
- User defined links 26
- Viewer settings 26
- Output buttons 27
- External video 28
- Html examples 28
- Sequence mode 28
- An event or event type in the camera triggers actions when activated an event type is a set of parameters that defines the actions a common event type is an alarm that causes the camera to upload images many event types use an event server to receive uploaded images 29
- An event type describes how and when the camera performs certain actions 29
- Axis 216fd fd v mfd mfd v event configuration 29
- Definitions 29
- Event configuration 29
- Event servers 29
- Event servers and enter the required information for the required server type 29
- Event types 29
- For details on each setting see the online help available from each web page 29
- This section describes how to configure the camera to perform certain actions when events occur 29
- When the setup is complete the connection can be tested by clicking the test button the connection test takes approximately 10 seconds 29
- Camera tampering 32
- Motion detection 33
- Axis 216fd fd v mfd mfd v event configuration 34
- Click save 34
- Example 34
- Examples 34
- Please see the online help for descriptions of each available option 34
- Port status 34
- Port status there is a list showing the status for the camera s input and output this is for the benefit of operators who have no access to the system options section 34
- To exclude parts of the include window select the exclude option and position the exclude window as required within the include window 34
- Security 35
- System options 35
- Date time 38
- Network 38
- Led settings 43
- Ports devices 43
- Maintenance 44
- Support 44
- Advanced 45
- Resetting to the factory default settings 46
- Pinout and interface 47
- The i o terminal connector 47
- Attach the cables for the device securely to the supplied green connector block 48
- Axis 216fd fd v mfd mfd v the i o terminal connector 48
- Connect input output devices to the camera as follows 48
- Once the cables are connected push the connector block into the green terminal connector on the camera 48
- Terminal connector 48
- Troubleshooting 49
- Axis 216fd fd v mfd mfd v troubleshooting 51
- Symptoms possible causes and remedial action 51
- Axis 216fd fd v mfd mfd v troubleshooting 52
- Axis 216fd fd v mfd mfd v troubleshooting 53
- For further assistance please contact your reseller or see the support pages on the axis website at www axis com techsup 53
- Technical specifications axis 216fd 216fd v 54
- Technical specifications axis 216fd 216fd v 55
- Technical specifications axis 216fd 216fd v 56
- Technical specifications axis 216mfd 216mfd v 57
- Technical specifications axis 216mfd 216mfd v 58
- Technical specifications axis 216mfd 216mfd v 59
- General performance considerations 60
- Bandwidth 61
- Optimizing your system 61
- Axis 216fd fd v mfd mfd v glossary of terms 62
- Glossary of terms 62
- Axis 216fd fd v mfd mfd v glossary of terms 63
- Axis 216fd fd v mfd mfd v glossary of terms 64
- Axis 216fd fd v mfd mfd v glossary of terms 65
- Axis 216fd fd v mfd mfd v glossary of terms 66
- Axis 216fd fd v mfd mfd v glossary of terms 67
Похожие устройства
- Axis 216MFD Инструкция по эксплуатации
- Axis 216MFD-V Инструкция по эксплуатации
- Axis M3044-V Инструкция по эксплуатации
- Axis M3045-V Инструкция по эксплуатации
- Wilo Comfort CO-5 Helix V 5205/2/K/CC Инструкция по эксплуатации блока управления
- Wilo Comfort CO-5 Helix V 5205/2/K/CC Инструкция по монтажу и эксплуатации
- Wilo Comfort CO-5 Helix V 5205/K/CC Инструкция по эксплуатации блока управления
- Wilo Comfort CO-5 Helix V 5205/K/CC Инструкция по монтажу и эксплуатации
- Wilo Comfort CO-5 Helix V 5206/2/K/CC Инструкция по эксплуатации блока управления
- Wilo Comfort CO-5 Helix V 5206/2/K/CC Инструкция по монтажу и эксплуатации
- Axis Q3615-VE Инструкция по эксплуатации
- Wilo Comfort CO-6 Helix V 2202/K/CC Инструкция по эксплуатации блока управления
- Wilo Comfort CO-6 Helix V 2202/K/CC Инструкция по монтажу и эксплуатации
- Wilo Comfort CO-6 Helix V 2203/K/CC Инструкция по эксплуатации блока управления
- Wilo Comfort CO-6 Helix V 2203/K/CC Инструкция по монтажу и эксплуатации
- Axis M3106-LVE Инструкция по эксплуатации
- Wilo Comfort CO-6 Helix V 2204/K/CC Инструкция по эксплуатации блока управления
- Wilo Comfort CO-6 Helix V 2204/K/CC Инструкция по монтажу и эксплуатации
- Wilo Comfort CO-6 Helix V 2205/K/CC Инструкция по эксплуатации блока управления
- Wilo Comfort CO-6 Helix V 2205/K/CC Инструкция по монтажу и эксплуатации