Proform Endurance 420 E (PFEVEL49716) Инструкция по эксплуатации онлайн [8/32] 317357

5. Orient the Upright (4) as shown. Have a second

person hold the Upright near the Frame (1).

See the inset drawing. Locate the wire tie (A)

in the lower end of the Upright (4). Tie the wire

tie to the Main Wire (48). Then, pull the upper

end of the wire tie until the Main Wire is routed

through the Upright.

Tip: To prevent the Main Wire (48) from fall-

ing into the Upright (4), secure the Main Wire

with the wire tie (A).

6. Tip: Avoid pinching the Main Wire (48). Avoid

damaging the indicated plastic tabs (B). Set

the Upright (4) on the Frame (1).

Attach the Upright (4) with four M10 x 25mm

Screws (92) and four M10 Split Washers (105);

start all the Screws, and then tighten them.

Avoid pinching the Main

Wire (48) and avoid

damaging the tabs (B)

105