Gazer F150 [8/48] Note no sound is recorded when the frame by frame shoot ing function is enabled frame by frame shooting may come in handy during long monotonous trips for sparing use of the memory card space

ENG

Usage

• When connected to a power source, the МVR switches to the

recording mode automatically, and pressing the OK button (15) man-

ually is not required. When the power is off, the МVR automatically

stops recording, saves the video le and shuts down. Prior (before

turning off the power) manual shutdown is not required. If needed,

you can turn the МVR off manually by pressing the ON/OFF button

(6) or set the required turn off time in the «Power off delay» menu.

• The MVR has protection against loop overwriting of recorded les.

This function is activated automatically when the G-sensor trips or

when the PROTECT button (4) is pressed.

• The MVR his capable of frame-by-frame shooting (Time-Lapse video

recording). To enable this function, one must select Time-Lapse re

cording mode by pressing the MODE button (7). When this function

is enabled, the МVR will shoot frames with 1 sec., 5 sec., 10 sec., 30

sec., or 1 min. intervals generating a 30fps video le.

Recommendation: Use the recording mode with a minimum

video length (1 minute).

Note: Do not turn off the recorder manually if it is in the recording mode

(this may damage the last recording). First stop the recording by short

pressing the OK button (15) and then turn off the device. The MVR can

operate independently for a certain period of time. The time of ofine

operation depends on the condition and charge of the built in battery.

Note: No sound is recorded when the frame-by-frame shoot-

ing function is enabled. Frame-by-frame shooting may come

in handy during long monotonous trips for sparing use of the

memory card space.

• There is a password protection function to restrict unauthorized ac-

cess to the МVR settings and recorded video les. To set or change

the password, go to the «Set password» menu item and set the de

sired password.

Caution! Make sure that les protected from loop overwriting are

deleted from the memory card in a timely manner. Should the

memory card overll with protected les, the МVR will stop recording.

Caution! Whenever you set a password, please, save it on reliable

data storage media. If you forget the password, please contact Gazer

support center for assistance. Contact information can be found on

the ofcial website www.gazer.com.