Felisatti MTF250/1500T комбинированная [7/8] Guarantee

released (Fig.2).

- Push the blade to the left and upwards at the same time to

remove it from its housing. Then extract downwards.

- Fit the new saw blade, making sure that the teeth are

directed towards the part indicated by the arrow on the blade

cover; t well to the shaft and lower the moving protection.

Note: if the version of the machine does not have the shaft locking

system as described (the case of the rst series manufactured),

the saw blade must be blocked using a bar or a screwdriver in

the hole of the saw blade, leaning against the rm structure of

the machine.

2. REPLACING THE BRUSHES

The brushes must be replaced after every 150 - 200 hours of

use or when they have reached a length of 5-6 mm. Go to an

authorised service centre for this change.

3. REPLACING THE SUPPLY CORD Z2 (Fig.1)

Make sure that the supply cable is in a good state and if not, go to

an authorised service centre for it to be changed.

GUARANTEE

See general Guarantee conditions printed on an adjoining sheet.

DECLARATION OF CONFORMITY

We hereby declare, under our own responsibility, that the

FELISATTI products described in this manual MTF216/1100T

and MTF250/1500T comply with the following standards or

standard documents: EN 61029-1, EN 55014 and EN 61300-3 in

accordance with EU Directives 73/23/EEC, 89/336/EEC, 98/37/

EEC and 2002/95/EEC.

Jordi Carbonell Santiago Lόpez

Wereservetherighttomaketechnicalchanges.