Skil 1734 LA (F 015 173 4LA) [9/116] The sds accessory requires freedom of
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Skil 1734 LA (F 015 173 4LA) [9/116] The sds accessory requires freedom of

Skil 1734 LA (F 015 173 4LA) [9/116] The sds accessory requires freedom of
9
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc., in
accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations dierent
from those intended could result in a hazardous situation.
5) SERVICE
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
SAFETY INSTRUCTIONS FOR HAMMERS
GENERAL
• Always check that the supply voltage is the same as the
voltage indicated on the nameplate of the tool
• This tool should not be used by people under the age of
16 years
• Do not work materials containing asbestos (asbestos
is considered carcinogenic)
• Never use the tool when cord is damaged; have it
replaced by a qualied person
• Alwaysdisconnectplugfrompowersourcebefore
making any adjustment or changing any accessory
ACCESSORIES
• SKIL can assure awless functioning of the tool only
when original accessories are used
• Use only accessories with an allowable speed matching
at least the highest no-load speed of the tool
BEFORE USE
• Use completely unrolled and safe extension cords with a
capacity of 16 Amps (U.K. 13 Amps)
• Avoid damage that can be caused by screws, nails and
other elements in your workpiece; remove them before
you start working
• Secure the workpiece (a workpiece clamped with
clamping devices or in a vice is held more securely than
by hand)
• Use suitable detectors to find hidden utility lines or
call the local utility company for assistance (contact
with electric lines can lead to re or electrical shock;
damaging a gas line can result in an explosion;
penetrating a water pipe will cause property damage or
an electrical shock)
• Dust from material such as paint containing lead, some
wood species, minerals and metal may be harmful
(contact with or inhalation of the dust may cause allergic
reactions and/or respiratory diseases to the operator or
bystanders); wear a dust mask and work with a dust
extraction device when connectable
• Certain kinds of dust are classied as carcinogenic (such
as oak and beech dust) especially in conjunction with
additives for wood conditioning; wear a dust mask and
work with a dust extraction device when
connectable
• Follow the dust-related national requirements for the
materials you want to work with
DURING USE
• Wear ear protectors (exposure to noise can cause
hearing loss)
• Use auxiliary handle(s), if supplied with the tool
(loss of control can cause personal injury)
• Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord (a cutting accessory contacting a “live” wire may
make exposed metal parts of the power tool “live” and
could give the operator an electric shock)
• Always keep the cord away from moving parts of the tool
• In case of electrical or mechanical malfunction,
immediately switch o the tool and disconnect the plug
• If the cord is damaged or cut through while working, do
not touch the cord, but immediately disconnect the plug
• Be aware of the forces that occur as a result of jamming
(especially when drilling metals); always use auxiliary
handle H 2 and take a secure stance
AFTER USE
• When you put away the tool, switch o the motor and
ensure that all moving parts have come to a complete
standstill
WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):
• Do not connect the blue (= neutral) or brown (= live) wire
in the cord of this tool to the earth terminal of the plug
• If for any reason the old plug is cut o the cord of this tool,
it must be disposed of safely and not left unattended
USE
• On/o 4
• Switch locking for continuous use 5
• Speed control for smooth starting 6
• Maximum speed control 7
With wheel A 2 the maximum speed can be adjusted
from low to high (A-F)
• Changing direction of rotation 8
- when not properly set in left/right position, switch B
cannot be activated
- the tool functions at limited speed when set for left
rotation
! change direction of rotation only when tool is at a
complete standstill
• Changing bits 9
! clean and lightly lubricate the SDS+ accessory
before insertion
- pull back locking sleeve D and insert accessory in
SDS+ chuck while turning and pushing it until it
engages; the accessory locks in position automatically
- pull accessory to check that it is locked correctly
- remove accessory by pulling back locking sleeve D
! the SDS+ accessory requires freedom of
movement which causes eccentricity when tool is

Содержание

Похожие устройства

power tools Such preventive safety measures reduce bystanders wear a dust mask and work with a dust extraction device when connectable the risk of starting the power tool accidentally d Store idle power tools out of the reach of children Certain kinds of dust are classified as carcinogenic such as oak and beech dust especially in conjunction with additives for wood conditioning wear a dust mask and and do not allow persons unfamiliar with the power tool or these Instructions to operate the power tool work with a dust extraction device when connectable Power tools are dangerous in the hands of untrained users e Maintain power tools Check for misalignment or binding of moving parts breakage of parts and any other condition that may affect the power tool s operation If damaged have the power tool repaired before use Many accidents are caused by poorly Follow the dust related national requirements for the materials you want to work with DURING USE Wear ear protectors exposure to noise can cause hearing loss Use auxiliary handle s If supplied with the tool maintained power tools f Keep cutting tools sharp and clean Properly loss of control can cause personal injury Hold power tool by insulated gripping surfaces when performing an operation where the cutting accessory may contact hidden wiring or Its own cord a cutting accessory contacting a live wire may maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control g Use the power tool accessories and tool bits etc In accordance with these Instructions taking Into account the working conditions and the work to be performed Use of the power tool for operations different make exposed metal parts of the power tool live and could give the operator an electric shock Always keep the cord away from moving parts of the tool In case of electrical or mechanical malfunction immediately switch off the tool and disconnect the plug If the cord is damaged or cut through while working do not touch the cord but immediately disconnect the plug Be aware of the forces that occur as a result of jamming especially when drilling metals always use auxiliary handle H and take a secure stance from those intended could result in a hazardous situation 5 SERVICE a Have your power tool serviced by a qualified repair person using only identical replacement parts This will ensure that the safety of the power tool is maintained SAFETY INSTRUCTIONS FOR HAMMERS GENERAL AFTER USE Always check that the supply voltage is the same as the voltage indicated on the nameplate of the tool This tool should not be used by people under the age of 16 years Do not work materials containing asbestos asbestos is considered carcinogenic Never use the tool when cord is damaged have it replaced by a qualified person When you put away the tool switch off the motor and ensure that all moving parts have come to a complete standstill WHEN CONNECTING NEW 3 PIN PLUG U K ONLY Do not connect the blue neutral or brown live wire in the cord of this tool to the earth terminal of the plug If for any reason the old plug is cut off the cord of this tool it must be disposed of safely and not left unattended Always disconnect plug from power source before making any adjustment or changing any accessory ACCESSORIES USE SKIL can assure flawless functioning of the tool only when original accessories are used Use only accessories with an allowable speed matching at least the highest no load speed of the tool On offu Switch locking for continuous use Speed control for smooth starting Maximum speed control i With wheel A the maximum speed can be adjusted from low to high A F Changing direction of rotation when not properly set in left right position switch B cannot be activated the tool functions at limited speed when set for left rotation BEFORE USE Use completely unrolled and safe extension cords with a capacity of 16 Amps U K 13 Amps Avoid damage that can be caused by screws nails and other elements in your workpiece rem we them before you start working Secure the workpiece a workpiece clamped with clamping devices or in a vice is held more securely than by hand I change direction of rotation only when tool is at a complete standstill Use suitable detectors to find hidden utility lines or call the local utility company for assistance contact Changing bits I clean and lightly lubricate the SDS accessory before Insertion with electric lines can lead to fire or electrical shock damaging a gas line can result in an explosion penetrating a water pipe will cause property damage or an electrical shock Dust from material such as paint containing lead some wood species minerals and metal may be harmful contact with or inhalation of the dust may cause allergic reactions and or respiratory diseases to the operator or pull back locking sleeve D and insert accessory in SDS chuck while turning and pushing it until it engages the accessory locks in position automatically pul I accessory to check that 11 is I ocked correctly remove accessory by pulling back locking sleeve D the SDS accessory requires freedom of movement which causes eccentricity when tool Is 9

Скачать