Mercusys MW325R [11/59] System requirements

MW325R

300Mbps Enhanced Wireless N Router User Guide

- 4 -

Chapter 2. Connecting the Router

2.1 System Requirements

 Broadband Internet Access Service (DSL/Cable/Ethernet)

 One DSL/Cable Modem that has an RJ45 connector (which is not necessary if the router is

connected directly to the Ethernet.)

 PCs with a working Ethernet Adapter and an Ethernet cable with RJ45 connectors

 TCP/IP protocol on each PC

 Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari

2.2 Installation Environment Requirements

 Place the router in a well-ventilated place far from any heater or heating vent

 Avoid direct irradiation of any strong light (such as sunlight)

 Keep at least 2 inches (5 cm) of clear space around the router

 Operating Temperature: 0℃~40℃ (32℉~104℉)

 Operating Humidity: 10%~90%RH, Non-condensing

2.3 Connecting the Router

If your Internet connection is through an Ethernet cable from the wall instead of through a

DSL/Cable/Satellite modem, connect the Ethernet cable directly to the router’s Internet port, then

follow steps 4 and 5 to complete the hardware connection.

1. Turn off the modem and remove the backup battery if it has one.

2. Connect the modem to the Internet port on your router with an Ethernet cable.

3. Turn on the modem, and then wait about 2 minutes for it to restart.

4. Turn on the router.