Trotec Speedy 360 [15/90] Speedy 360

Speedy 360

BA 8032_2.2_EN (05/2016) 15 / 90

www.troteclaser.com

2.4 Area of responsibility

2.4.1 Responsibilities of the operator

- In addition to the safety notes and instructions stated in this manual, consider and observe

the local accident prevention regulations and general safety regulations that apply at the

operation site of the machine.

- If the machine is used industrially, the operator is subject to the legal obligations

concerning industrial safety.

- All personnel involved in installation, set-up, operation, maintenance and repair of the

machine must have read and understood this Operation Manual and in particular the

“Safety” section. The personnel must be trained and informed about all the functions and

potential dangers of the machine.

- The user is recommended to prepare company internal instructions considering the

occupational qualifications of the personnel employed in each case, and the receipt of the

instruction/Operation Manual or the participation in the introduction/training should in each

case be acknowledged in writing.

- Keep this manual in the immediate vicinity of the machine so that it is accessible at all

times to all persons working on or with the machine.

- Authority for the individual activities relating to the application of the machine (e.g.

installation, operation, maintenance and cleaning) must be clearly defined and observed,

so that no unclear competencies result under the aspect of safety. This applies in

particular to work to be performed on the electrical equipment that may only be performed

by qualified specialists.

- Maintenance and repair work as specified in the present operation manual must be carried

out regularly.

- For all activities concerning installation, set-up, start-up, operation, modifications of

conditions and methods of operation, maintenance, inspection and repair, the switch-off

procedures that may be provided in the Operation Manual must be observed.

- Provide appropriate personal protection equipment (e.g. protective goggles).

- The operator is responsible for the safety-related state of the machine.

- A CO2 fire extinguisher must always be at hand, as the laser beam can ignite flammable

materials.

- Do not store any flammable materials in the working area or in the immediate vicinity of

the device. Particularly, residues of processed materials have to be removed to prevent

any fire hazard.

- The operator must ensure cleanliness and accessibility at and around the machine by

corresponding instructions and controls.