DoCash 3050 [8/20] Транспортировка и хранение

DoCash 3050 [8/20] Транспортировка и хранение
1.4. Switching on
To switch the banknote counter on follow the procedure:
1. Ensure that power supply meets the requirements specified in
section 1.1 of the Manual.
1.1. If you suppose the Remote Display to be connected to the
counter, please connect it before the counter to be started.
2. Connect the power supply cable to the plug on the rear board.
Move the power supply switch to ‘— position (On).
3. Counting result display will show “0” (see section “Control
Panel”).
4. The machine automatically performs a self-test after be-
ing turned on. If one of the following error message is
displayed on the preset display window, usually it is be-
cause the sensor is blocked by banknotes or dusts. Then
use a brush or a soft cloth to clean the dusts on the
sensor or remove the banknote, and then restart the ma-
chine.
Fluorescence sensor adjust the top cover to right position so as to
avoid strong light source
Banknote feeding
sensor
Remove the banknote and Clear away the dusts
Banknote receiving
sensor
Remove the banknote and clear away the dust
Left counting sensor Same as above, or aim at the the axes of the light
beam
Right counting
Sensor
Same as above
Rotate speed
Sensor
Clean the code wheel and Sensor, or replace the
rubber-belt
Internal memory
fault
Resume to factory setting
E00
E10
E11
E30
E31
E50
E80
6
6. Транспортировка и хранение
При транспортировке и хранении счетчика следует руководство-
ваться условными обозначениями, указанными на упаковке.
При транспортировке допускаемая температура составляет
от –30 °С до +50 °С. Хранение счетчика разрешается только в
отапливаемых помещениях при температуре от +1 °С до + 40 °С
при относительной влажности воздуха до 80 % (при 25 °С) без
конденсации.
7. Комплектность
В комплект поставки счетчика DoCash серии 3050 входят:
31
Счетчик банкнот 1
Кисть для очистки 1
Комплект запчастей 1
Кабель электропитания 1
Руководство пользователя 1

Содержание

Скачать