Biral MX 12-3 [18/56] Intended application
![Biral MX 13-1 [18/56] Intended application](/views2/1405518/page18/bg12.png)
4. Assembly
4.1 Flushing out the heating system (with pump removed)
In order to avoid undesirable interruptions in operation
and non-starting of the pump after long periods of standstill,
it is recommended for a newly-installed or converted heating
system that the system be drained, flushed through well
and then refilled again after heating up for the first time.
The system must comply with the latest state of technology.
(Positioning of expansion vessel or initial safety feed.)
4.2 Antifreezers (as far as necessary)
Important: Flush the piping network through particularly well
before the antifreeze mixture is filled.
Follow the antifreeze supplier’s instructions with respect to mixing
and filling, as well as the choice of material in the piping and
apparatus network (pay particular attention to protection against
corrosion!). Water/glycol mixture up to 50% glycol ratio permissible.
Over 10% glycol ratio, correct the pumping data of the pumps
accordingly.
4.3 Installation
Installation only after completion of all welding and soldering work.
Be sure to avoid any water dripping onto the pump motor
and especially the terminal box.
Install the pump casing stressfree in the system.
3. Intended application
Biral circulation pumps of the series
MX/M/SX
are use to circulate liquids in
– hot water heting systems (MX/M)
– enclosed industrial circulation systems (MX/M)
– thermal solar installations (SX)
The pumps may not be used in the food-processing industry
nor for drinking water.
english
18
No combustible or explosive liquids must
be transported.
The liquid must not contain any solid matter,
fibres or mineral oils.
3.1 Medium delivered
In heating installations the medium delivered should comply
with the requirements of heating water according to VDI 2035.
Water/glycol mixture permissible with up to 50% glycol.
3.2 Operating temperature/Operating pressure
Permissible water temperature: –20 °C to 110 °C*
Permissible operating pressure: max. 10 bar
Ambient temperature: max. 40 °C
Noise level: <70 dB (A)
Protection: IP 44
Tensione di alimentazione: 1×230 V +6%-10%, 50 Hz
* SX: for brief periods 140 °C
Содержание
- Mx 10 mx 12 mx 13 m 14 m 15 sx 12 sx 13 sx 15 1
- Declaration of conformity en 3
- Declaraţie de conformitate ro 3
- Deklaracja zgodności pl 3
- Konformitäts erklärung de 3
- Декларация о соответствии товара рус 3
- M 14 m 15 4
- Mx 10 mx 12 mx 13 4
- Deutsch 5
- Inhaltsverzeichnis 5
- Deutsch 6
- Sicherheitshinweise 6
- Deutsch 7
- Transport lagerung 7
- Deutsch 8
- Es dürfen keine brennbaren oder explosiven flüssigkeiten gefördert werden die flüssigkeit darf keine feststoffe fasern oder mineralöle enthalten 8
- Montage 8
- Verwendungszweck 8
- Deutsch 9
- Achtung 10
- Deutsch 10
- Elektrischer anschluss 10
- Deutsch 11
- Achtung 12
- Deutsch 12
- Inbetriebnahme betriebskontrolle 12
- Deutsch 13
- Störungsübersicht 13
- Wartung service 13
- Contents 15
- English 15
- English 16
- Safety information 16
- English 17
- Transport storage 17
- Assembly 18
- English 18
- Intended application 18
- No combustible or explosive liquids must be transported the liquid must not contain any solid matter fibres or mineral oils 18
- English 19
- Electrical connection 20
- English 20
- Warning 20
- English 21
- Commissioning operating check 22
- English 22
- English 23
- Maintenance service 23
- Summary of faults 23
- Polski 25
- Spis treści 25
- Polski 26
- Wskazówki bezpieczeństwa 26
- Polski 27
- Transport magazynowanie 27
- Montaż 28
- Nie wolno przesyłać cieczy palnych i wybuchowych ciecze nie mogą zawierać ciał stałych włókien ani olejów mineralnych 28
- Polski 28
- Zastosowanie 28
- Polski 29
- Podłączenie elektryczne 30
- Polski 30
- Polski 31
- Polski 32
- Uruchomienie kontrola podczas pracy 32
- Konserwacja serwis 33
- Polski 33
- Przegląd usterek 33
- Cuprins 35
- Română 35
- Reguli de securitate 36
- Română 36
- Română 37
- Transportul depozitarea 37
- Montarea 38
- Nu trebuie utilizate fluide inflamabile sau explozive fluidul nu trebuie să conţină substanţe solide fibre sau uleiuri minerale 38
- Română 38
- Scopul utilizării 38
- Română 39
- Atenţie 40
- Racordarea electrică 40
- Română 40
- Română 41
- Atenţie 42
- Punerea în funcţiune verificarea funcţionării 42
- Română 42
- Prezentarea defecţiunilor 43
- Română 43
- Întreţinere service 43
- Pусский 45
- Содержание 45
- Pусский 46
- Указания по безопасности 46
- Pусский 47
- Транспортировка хранение на складе 47
- Pусский 48
- Монтаж 48
- Нельзя использовать для подачи легко воспламеняющихся или взрывоопасных жидкостей жидкость не должна содержать никаких твердых веществ волокон или минеральных масел 48
- Применение 48
- Pусский 49
- Pусский 50
- Внимание 50
- Подключение к электрической сети 50
- Pусский 51
- Pусский 52
- Ввод в эксплуатацию контроль эксплуатации 52
- Внимание 52
- Pусский 53
- Обзор причин неисправностей 53
- Техническое обслуживание сервисное обслуживание 53
Похожие устройства
- Biral MX 12-4 Инструкция по монтажу и эксплуатации
- Biral MX 13 Инструкция по монтажу и эксплуатации
- Biral MX 13-1 Инструкция по монтажу и эксплуатации
- Biral MX 13-2 Инструкция по монтажу и эксплуатации
- Biral MX 13-3 Инструкция по монтажу и эксплуатации
- Biral MX 13-4 Инструкция по монтажу и эксплуатации
- Biral A 12 Инструкция по монтажу и эксплуатации
- Biral A 13 Инструкция по монтажу и эксплуатации
- Biral A 14 Инструкция по монтажу и эксплуатации
- Biral A 15 Инструкция по монтажу и эксплуатации
- Biral A 16 Инструкция по монтажу и эксплуатации
- Biral A 401 Инструкция по монтажу и эксплуатации
- Biral A 500 Инструкция по монтажу и эксплуатации
- Biral AD 401 Инструкция по монтажу и эксплуатации
- Biral A 12 KW Инструкция по монтажу и эксплуатации
- Alligator S-700RS Инструкция по эксплуатации
- Biral A 13 KW Инструкция по монтажу и эксплуатации
- Biral A 14 KW Инструкция по монтажу и эксплуатации
- Biral A 15 KW Инструкция по монтажу и эксплуатации
- Gigabyte GA-945GM-DS2 (rev. 2.0) Поддерживаемые модули памяти