Bosch Serie|2 TDS2170 TDS2170 [22/106] Cleaning maintenance

B O S C H

ENGLISH

* Model dependent

Cleaning & Maintenance

1. Descaling process

This appliance is equipped with an automatic clean

warning indicator, which indicates that scale

particles must be removed from inside the steam

chamber.

When activated, three beeps will be heard, and the

“Calc'nClean” indicator light (7) will ash indicating

that the process should be performed.

You may continue ironing for a time. Once this time

has passed, you will only be able to dry iron (without

steam).

To start steam ironing again, follow this descaling

process:

1 Fill the tank (11) with tap water.

2 Plug in the mains cable (9) and press "on/off" button

(5) to switch the appliance on.

3 Press the descaling button (6) for 2 seconds.

The “Calc'nClean” indicator light (7) will remain

permanently lit and a beep will be heard.

4 Wait until one of the indicator lights (2,3,4) stops

ashing and remains lit permanently. Two beeps will

be heard.

5 Place the iron on the "Calc'nClean" container (19).

Make sure that the surface on which the container is

placed is stable.

Warnings:

• Do not remove the iron from the container until

the process has nished. Boiling water and steam

will be released through the soleplate, removing

limescale and/or deposits that may be inside.

• The container must only be used the to perform the

descaling process. It must not be used as a stand

for the iron while ironing.

2”

minmin