Beko CG 51110 G — how to Operate Gas Burners Safely and Efficiently [30/52]

Part 4 Operating the top burners Use of top gas burners Turn the relevant knob by slightly pressing in counter clockwise direction The large flame on the knob corresponds to maximum capacity position and the small flame corresponds to minimum capacity position Ignition by button In models with ignition It provides automatic ignition I 22 cm r 24 cm if your cooker has flame failure device on gas burners In case of any flame failures To obtain maximum effidenty burners the flame failure i device immediately cuts of in gas saving and better out the gas flow It is also a safety put Therefore we recommend auxiliary burner use the pan support adaptor You should turn the knob to clockwise direction by pressing The spark occurs itself immediately on the burners till you take your hand off the knobs device for the wrong use of to use saucepans whose base the children completely cover the flames smaller diameters to be put In models with Ignition from the knob j efailure with any reasons in the top A correct use to burner results Four saucepans with much When the button is pressed and released all plugs spark at the same time The ignition starts at the burner through which the gas flows If an ignition does not occur repeat the same action Holding the button at pressed position does not provide ignition You should turn the knob to the clockwise direction by pressing You should ignite by pressing the knob and wait for its ignition After you release the knob Warning position more than 15 seconds the burner Repeat the sequence 6 of ignition does the knob pressed for 15 seconds If still no igniton You should keep the knob at pressed position operations if the flame does not continues the occurs wait for 1 minute and repeat again for 3 5 seconds after you see the flame around if not continue repeat the same process by keeping Do not keep the knob in pressed