Tp-Link TL-R480T+ Инструкция по эксплуатации онлайн [27/124] 16562

-23-

Get IP Address by

Unicast:

The broadcast requirement may not be supported by a few ISPs.

Select this option if you can not get the IP address from your ISP

even with a normal network connection. This option is not required

generally.

Use the following DNS

Server:

Select this option to enter the DNS (Domain Name Server) address

manually.

Primary DNS:

Enter the IP address of your ISP’s Primary DNS (Domain Name

Server). If you are not clear, please consult your ISP.

Secondary DNS:

Optional. If a Secondary DNS Server address is available, enter it.

Upstream Bandwidth:

Specify the bandwidth for transmitting packets on the port.

Downstream

Bandwidth:

Specify the bandwidth for receiving packets on the port.

¾ Dynamic IP Status

Status:

Displays the status of obtaining an IP address from your ISP.

z “Disabled” indicates that the Dynamic IP connection type is not

applied.

z “Connecting” indicates that the Router is obtaining the IP

parameters from your ISP.

z “Connected” indicates that the Router has successfully

obtained the IP parameters from your ISP.

z “Disconnected” indicates that the IP address has been

manually released or the Router gets no response from your

ISP. Please check your network connection and consult your

ISP if this problem remains.

IP Address:

Displays the IP address assigned by your ISP.

Subnet Mask:

Displays the Subnet Mask assigned by your ISP.

Gateway Address:

Displays the Gateway Address assigned by your ISP.