Tp-Link TL-R480T+ Инструкция по эксплуатации онлайн [30/124] 16562

-26-

Connection Type:

Select PPPoE if your ISP provides xDSL Virtual Dial-up connection.

Click <Connect> to dial-up to the Internet and obtain the IP address.

Click <Disconnect> to disconnect the Internet and release the

current IP address.

Account Name:

Enter the Account Name provided by your ISP. If you are not clear,

please consult your ISP.

Password:

Enter the Password provided by your ISP.

Active Mode:

You can select the proper Active mode according to your need.

z Manual: Select this option to manually activate or terminate the

Internet connection by the <Connect> or <Disconnect> button.

It’s optimum for the dial-up connection charged on time.

z Always-on: Select this option to keep the connection always

on. The connection can be re-established automatically when it

is down.

z Time-based: Select this option to keep the connection on

during the Active time you set.

PPPoE Advanced

Settings:

Check here to enable PPPoE advanced settings.

Keep Alive:

Once PPPoE is connected, the Router will send keep-alive packets

every "Keep Alive Interval" sec and "Keep Alive Retry Times" to

make sure the connection is still alive. If the Router does not get the

response from ISP after sending keep-alive packets, the Router will

terminate the connection.

MTU:

MTU (Maximum Transmission Unit) is the maximum data unit

transmitted by the physical network. It can be set in the range of

576-1492. The default MTU is 1480. You are recommended to keep

the default value if no other MTU value is provided by your ISP.

ISP Address:

Optional. Enter the ISP address provided by your ISP. It's null by

default.