Tp-Link TL-PS110U [67/79] Windows 95 98 me nt 2000 xp 2003 troubleshooting

check the cable connection. If the pins are damaged, contact your dealer for a replacement

connector.

Windows 95/98/Me/NT/2000/XP/2003 Troubleshooting

Multi-Segment LAN Environment Installation (through the Network Print Port)

If your print server and Windows 95/98/Me/NT/2000/XP/2003 are located on two different

segments, and your Windows NT server is used as the router/gateway you will need to

implement the following procedures in order for your print server to function properly:

 Add the RIP for NWLink IPX/SPX compatible transport. See RIP for NWLink IPX/SPX

compatible transport Installation Procedure later in this section.

 Add the frame type 802.2 for both Ethernet adapters. See Multi-Segment Frame Type

802.2 Installation later in this section.

RIP for NWLink IPX/SPX compatible transport Installation Procedure

1. From your Windows NT server that is used as a router, select Start from the bottom left

hand corner of the screen.

2. Select Settings.

3. Select Control Panel.

4. Double-click the Network icon.

5. Select Services.

6. Select Add.

7. In the Select Network Service box, select the RIP for NWLink IPX/SPX compatible

transport. Click OK.

8. Follows the directions on the screen.

9. Done.

Multi-Segment Frame Type 802.2 Installation

1. From your Windows NT server that is used as a router, select Start from the bottom left

hand corner of the screen.

2. Point to Settings, and select Control Panel.

3. Double-click the Network icon.

4. Select Protocols.Select the NWLink IPX/SPX Compatible Transport.

5. Select Properties.

6. Select your (first) network interface card and select Manual Frame Type Detection.

7. Click Add.

8. In the Frame Type field, select Ethernet 802.2.

9. In the Network Number field, type in an unique 8-digit hexadecimal network number.

For example: 12345ABC.

10. Select Add.

11. Repeat the Steps 8-12 for the other Ethernet adapter.

12. Restart the computer.

13. Done.