Vitek VT-3786 [4/10] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Vitek VT-3786 [4/10] English

Vitek VT-3786 [4/10] English
• Should the player receive shocks for more than 45 seconds continuously,
the sound can mute for a very short while and will resume once the player
has stabilised from the shock.
Notes:
• When using the Anti-shock function, the disc will rotate faster than normal
playback and memory is active. Only use the ANTI-SHOCK function when
necessary to preserve the battery life.
• The Anti-shock function will not correct the errors arising from the use of
defective scratched or dirty discs.
HOLD switch
This unit is equipped with a HOLD switch to disable the operating controls.
Select HOLD switch (17) to "ON".
CONNECTING TO HOME STEREO SYSTEMS
The line out jack is made to accept a stereo
mini plug (3.5 mm). By using a commercially
available audio line cable, simply connect the
cable's mini plug to line out jack on your player,
and the other appropriate end to CD/AUX
input(s) of your home stereo system.
Note:
Always switch the power off before mak-
ing any connections between the player and
any other set.
Note:
The volume control or the player
become inoperable when the line out jack is
used. Adjustments are made on your audio
system.
CLEANING
CLEANING THE PICKUP LENS
A dirty lens will cause sound skipping. If the lens is very dirty, the player may
not work. Open the CD door and clean the lens as follows:
• FINGERPRINTS ON LENS
Use a cotton swab starting in the middle and working to the outside edge,
pay attention in doing this operation or the pick up lens could be damaged.
ENGLISH
7
4. Press the CD Mode button (2) once to return to the Normal Playback
mode.
PROGRAMMED PLAYBACK
1. Press the PLAY/PAUSE button (6) and after 3 seconds the STOP button
(5).
2. Press the PROGRAM button (1). The track number and 'PROGRAM' will
appears on the display when press the PROG button.
3. Press BACKWARD (SKIP ) or FORWARD (SKIP ) button to select the
desired track to be programmed. The track number which will be pro-
grammed will appears on the display.
4. Press the PROGRAM button (1) to enter the track into memory.
5. Repeat the steps 3 and 4 to program up to 20 tracks.
6. Press PLAY/PAUSE button (6) once to start programmed playback.
7. To cancel programmed playback, press the STOP button (5) twice.
Note:
Programmes can be set in Stop mode only.
During program playback, if you wish to repeat the entire programmed play-
back, press the MODE button repeatedly until the ( ALL ) indicator
appears on the display.
SPECIAL FUNCTIONS
Dynamic Bass Boost
Set the BASS BOOST switch (13) to "ON" position to enjoy a more powerful
Bass sound.
Note:
Since Bass Boost performance will change depending on the volume
level, sound maybe distorted due to high volume is set. Lower the volume
level until the sound quality is improved.
Auto Power Off
When the unit is stopped (standby mode) for approximately 30 seconds, the
Auto Power Off function will activated and turn the unit off automatically.
Anti-shock Function
• If in use, the player is likely to receive shocks or vibrations (i.e. whilst
walking or in a moving vehicle), press the ANTI-SHOCK button (14) to pro-
vide uninterrupted playback.
• When the button is pressed, the display will show ( ) and the function is
initialised. When ( ) appears on the display, the data buffer is full.
ENGLISH
6

Содержание

Похожие устройства

Скачать