Tp-Link TL-R488T Инструкция по эксплуатации онлайн [23/90] 39454

TL-R488T Load Balance Broadband Router User Guide

Figure 4-3

¾ MAC Address - This field displays the physical address of the LAN. The value can't be

changed.

¾ IP Address - Enter the IP address for the LAN of the Router, the formal is in dotted-decimal

notation (the factory default value is 192.168.1.1).

¾ Subnet Mask - Enter the subnet mask for the LAN of the Router, this address code

determines the size of the network. Normally use 255.255.255.0 as the subnet mask.

)

Note:

1) If you change the IP address of the LAN, you must use the new IP address to login to the

router.

2) If the new LAN IP Address you set is not in the same subnet, the IP Address pool in the

DHCP sever will not take effect, until they are re-configured. Besides this, the Virtual Server

and DMZ Host may change accordingly at the same time, and you’d better re-configure it as

well.

4.3.2 WAN

Choose menu “Network→WAN”, you can configure the IP parameters of the WAN on the screen

below.

The Router provides three connection types for WAN to connect to the Internet, they are

“Dynamic IP”, “Static IP” and “PPPoE”. For configuring the WAN, you should select the

connection type firstly according your needs.

1. Dynamic IP

If you aren’t given any login parameters and IP information, please select Dynamic IP (shown in

Figure 4-4), then the router will automatically get

IP parameters from your ISP. Click the Renew

button to renew the IP parameters from your ISP. Click the Release button to release the IP

parameters.