Tp-Link TL-R488T [42/90] Dhcp settings

Tp-Link TL-R488T [42/90] Dhcp settings
TL-R488T Load Balance Broadband Router User Guide
37
Figure 4-17
Click any of them, and you will be able to configure the corresponding function. The detailed
explanations for each submenu are provided below.
4.4.1 DHCP Settings
Choose menu “DHCPDHCP Settings”, you can configure the DHCP in the next screen (shown
in Figure 4-18).
The route
r is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, which
provides the TCP/IP configuration for all the PCs that are connected to the router on the LAN.
Figure 4-18
¾ DHCP Server - Enable or disable the DHCP server. If you disable the Server, you must
have another DHCP server within your network or else you must manually configure the
computer.
¾ Start IP Address - This field specifies the first address in the IP address pool. The default
address is 192.168.1.100.
¾ End IP Address - This field specifies the end address in the IP address pool. The default
address is 192.168.1.199.
¾ Address Lease Time - This is the amount of time in which a network user will be allowed
connection to the router with their current dynamic IP address. Enter the amount of time (in
minutes), the range of the time is 1 ~ 2880 minutes. The default value is 120 minutes.

Содержание