UGUR UDD 400 SC [23/110] Warning

UGUR UDD 500 SCB [23/110] Warning
EN EN
C- INSTALLATION OF YOUR PRODUCT
PICTURE 8
Installation
Before positioning, remove and disassemble all packaging materials and bottom wooden pallet of the
product. (It may be necessary to lift your device for removing the bottom pallet).
Insert the replacement parts inside your product according to the installation instructions. Only use genu
-
ine Uğur spare parts.
Inauthentic spare parts may constitute danger for you and damage your product.
Place the product anywhere you desire. Consider the placement rules written in the manual while posi
-
tioning the product.
Balance your product in width and in depth by means of a water gauge.
Please perform optional balancing operation by means of the adjustable feet (optional) at the bottom
front of your product. (Picture 8)
In models with wheels (optional), wheel brake (optional) must be locked or if there is no wheel brake, it
must be guaranteed that the device will not move after the positioning of the product.
C- INSTALLATION OF YOUR PRODUCT
PICTURE 9 PICTURE 10 PICTURE 11
Electric Connection Rules
The product will start when you insert the plug into the outlet as shown in picture 9.
WARNING!
It is forbidden to insert the plug into multiple socket and to use extension cord. (Picture 10)
There is no separate on-o switch on your product.
Do not contact the cables of your product, which are connected to the mains, to hot surfaces.
The outlet you will use must be grounded. Furthermore, the outlet to be used must have the resistance of
at least 10-16 A and be protected with a suitable fuse. Denitely take assistance from our technical service
or a competent electrician with regards to the fuse that should be present on the mains where the outlet is
connected.
Mains voltage and frequency must be same with the value written on the label inside your product. If your
mains voltage is extremely below or above the value indicated, denitely supply demanded voltage by us-
ing a voltage regulator. You can get assistance from an expert electrician with this regard.
Do not place your product's cord onto passageways. This may cause you to get injured and damage your
cooler. (Picture 11)
44 45

Содержание

Скачать