Tp-Link TL-WN951N [30/48] Remove a profile

TL-WN951N 300Mbps Wireless N PCI Adapter

¾ Wireless Mode when Starting an Ad Hoc Network: Specifies 2.4 GHz 300/54/11 Mbps

to start an Ad Hoc network if no matching network name is found after scanning all

available modes. This mode also allows the selection of the channel that the Wireless

Adapter uses. The channels available depend on the regulatory domain. If the adapter

finds no other ad hoc adapters, the channel that the adapter starts the ad hoc network with

will be selected automatically. The Adapter must match the wireless mode and channel of

the clients it associates.

¾ 802.11 Authentication Mode: Select which mode the Adapter uses to authenticate to an

access point:

• Automatic causes the adapter to attempt authentication using shared, but switches it

to open authentication if shared fails.

• Open System enables an adapter to attempt authentication regardless of its WEP

settings. It will only associate with the access point if the WEP keys on both the

adapter and the access point match.

• Shared-key only allows the adapter to associate with access points that have the

same WEP key.

For infrastructure (access point) networks, click Preferred APs… to specify four access points

at most to the client adapter that attempts to be associated to the access points. The four

access points have different priorities; the frontal has the higher priority.

Figure 3-7

3.1.2.2. Remove a profile

1. Go to the Profile Management tab (shown in Figure 3-2).

2. Select the profile name in the Profiles List.

3. Click Remove.

)

Note:

The profile being used can’t be removed.

3.1.2.3. Switch another Profile

1. Go to the Profile Management screen (shown in Figure 3-2).