Electrolux EW 970 C [28/30] Installation

Levelling the machine

The machine must be installed on a sound and firm

surface, and must not be touching walls or furniture.

Adjust the feet to level the machine. Make sure the

machine is standing on all four feet. After levelling

the machine, secure the feet by tightening the ring

nuts (Fig. 1).

Some vibration is normal and unavoidable when the

machine is spinning the load, particularly if the floor

is not a concrete one.

When the appliance location is on carpet floors,

attention must be paid so as to ensure that

there is no obstruction to the bottom vents.

Water intake

Insert the combination rubber washer/filter and

connect the intake hose to a tap with a 3/4" pipe

thread. If necessary, use the restrictor supplied

(1/2") (Fig. 2).

The intake hose must not be joined onto any form

of extension hose. If it is too short, the entire hose

must be replaced with a longer high-pressure hose,

specially designed for the purpose.

The machine end of this hose can be turned in any

direction. Loosen the retaining nut, turn the hose,

then retighten the nut (Fig. 3).

Installation

- 42 -