Hottek HT-962-038 [11/20] Replacement of battery

ENG

Time setup

• Press and hold the «Time» button (5) until the hour indications on the

display(6)startashing.

Notes:

Whenyouinstallorreplacethebattery,thetime«АМ12:00»willbeshownon

thedisplayandthehoursindicationswillstartashing.

Ifyoudon’tpressanybuttonswithin10seconds,theindicationsonthedisplay

willbeshownconstantly.

• Consequentlypressthebutton«Time»tosetthedesiredhours.Toenterthe

hoursindicationspressthebutton«|T».Afteryouenterthehoursdata,the

minutesindicationswillstartashing.

Note:

Thismodeluses12hourformatofcurrenttimeindication.Whenyousetthe

desiredtime,payattentiontothesymbols«АМ/PM»alternatelyappearingin

the left part of the display. «АМ» indicates time before noon, «PM» – after

noon.

• Consequentlypressthebutton«Time»tosetthedesiredminutes.Toenter

theminutesindicationspressthebutton«|T».Timesetupisnished.

Temperature indication

If there is a battery in the battery compartment, the temperature indication

is permanently shown on the display (6) regardless of whether the scale is

switchedonornot.

Temperature measurement unit selection button

Roomtemperatureisshownonthedisplay(6)eitherindegreeCelsius(°С)or

indegreeFahrenheit(°F).

You canchangethetemperaturemeasurementunitsonlywhenthescaleis

switchedon.

Forthisswitchthescaleonbytouchingthe«|T»buttonandthentouchand

holdthe«|T»buttonformorethan4seconds.

Note:

Whenyouinstallor replace the battery, thetemperaturemeasurementunits

«°С»areused(bydefault).

Replacement of battery

• Openthebatterycompartmentcoverandremovethesafetylmwrapped

aroundbatteries.Install1 batteryof«CR2032»typestrictlyobservingthe

polarity,thenclosethebatterycompartmentcover.