D-Link DWL-G122 [14/45] Using the configuration utility continued

Using the Configuration Utility (continued)

Advanced

Ad-Hoc Channel:

All devices in the Ad-Hoc

network must be set to the

same channel.

Click Apply if you have made any changes.

Data Packet Parameter:

Select the parameters here.

Profile IP Settings:

You can Enable or

Disable the IP Settings

portion of your profile here.

If you select Disable you

will need to configure the IP

address information each

time you connect to a

network. If you select

Enable you will maintain

the same IP address

information each time you

connect to a network.

Select Enable or Disable.

Launch Utility on Startup:

Power Mode:

Disable -This default setting consumes the most power.

Enable - This setting consumes the least power.

Fragmentation Threshold:

This value should remain at its default setting of 2432. If you experience a

high packet error rate, you may slightly increase your Fragmentation

Threshold within the value range of 256 to 2432. Setting the Fragmentation

Threshold too low may result in poor performance.

This value should remain at its default setting of 2432. If inconsistent data

flow is a problem, only a minor modification should be made.

RTS Threshold: