Fubag PTH 1000T для сильнозагрязненной воды 838257 [6/25] Preparation before use

www.fubag.ru

Omperator's anual

Oil level

Remove the filler plug-dipstick (no. 2) by unscrewing it,

and wipe the dipstick.

Insert the dipstick into the filler neck (no. 3) without

screwing it. N.B.: A second black plug (no. 4) without a

dipstick, is available if necessary on the other side of the

engine.

Visually check the level and top up if necessary.

Tighten the filler plug-dipstick (no. 2) completely onto

the filler neck (no. 3).

Check that there are no leaks.

Wipe off excess oil with a clean cloth.

4. Preparation before use

Positioning for operation

Place the motor pump on a sufficiently strong, flat and horizontal surface so that the electric pump

cannot sink in (the inclination must not exceed 10° in any direction).

Select a clean location, ventilated and protected from inclement weather, and provide an oil and fuel

supply close to the place of motor pump usage, while still maintaining a safe distance.

Select a location which will not impede the movement of people or vehicles.

Make sure that the motor pump remains stable and immobile while in operation. Don't forget that the

suction hose tends to pull the motor pump towards the water source during pumping.

Place the motor pump as close as possible to the liquid being drawn-in. The shorter the vertical

distance between the motor pump and the liquid surface, the more rapid the priming and the greater

the volume of liquid pumped.

Submerge the strainer completely within the liquid, taking care that it is not blocked.

- 5 -