Hama Color Edge 00136294 Инструкция по эксплуатации онлайн [6/97] 373147

5.2 Measuring station

•You can also position the measuring station on alevel outdoor surface.

•Werecommend installing the measuring station securely on an outdoor wall using the recess (27).

•Install an anchor,screw,nail, etc. in the wall of your choice.

•Hang up the base/measuring station using the opening (27) intended for this purpose.

6. Operation

6.1 Connection to the measuring station

•When the batteries have been inserted, the base station automatically searches for aconnection to

the measuring station and to the radio signal.

Note

•The respective symbols will ash during the connection attempts: connection to the

measuring station,

connection to the DCF signal

•Donot press any buttons during setup. Otherwise, values may not be transmitted correctly and

thereisarisk of value errors and inaccuracies.

•Donot change the location of the base station during the search processes.

•The process is completed when the indoor (8) and outdoor (3) measurement data is displayed.

6.2 Basic and manual settings

Automatic setting using the DCF signal

When the base station has been switched on for the rst time and successful transmission has been

established between the base station and the measuring station, the clock will automatically search for

the DCF signal. During the search, the radio symbol ashes.

Display Search for the DCF signal

Flashing display

Manual entry not possible!

Active

Constant display

Successful –

signal is being received

No display Inactive

•Ifthe station still does not receive asignal, press and hold the UP button (19) for approximately 3

seconds to start the manual search for the DCF signal. The radio symbol starts to ash.

Note –Time settings

•The search process can take up to 7minutes. If it fails, the radio symbol will go out.

•Inthe meantime, however,you can set the time and the date manually.

•The clock automatically continues to search for the DCF signal on adaily basis (at 1amand 5

am). If the signal is received successfully,the manually set time and date areoverwritten.

Note –Summer time

The clock automatically switches to summer time. appears on the display as long as summer

time is activated.