Kospel Twister EPS2-5,5 [10/24] Installation assembly

Installation – Assembly

1. Fix the mixer tap set on water supply

pipe.

2. Connecttheheatertothetapbodywith

nuts,gasketsandtheowreducerwhich

ispositionedinthelter(seepicture).

3. Allowwatermainspressuregetstothe

tap.

4. Openthetapandcheckforleaks.Doit

withoutthespray-headon.Someimpuri-

tieswhichcomefromtheinstallationmay

appear.

5. Ventthewaterinstallation.

6. Putthespray-headon.

7. Connecttheheatertothepowersource

(throughtheinstallationcablebox).

Venting

1. Shutoffelectricsupplies.

2. Turntheowon(turnthehotwatertapon)inordertoventtheinstallationuntil

theowofwaterbecomesconstantandeven.

3. Shutofftheow.

4. Switchontheelectricsupplies.

Vent the appliance every time after a decay of water.

Maintenance

1. Cut off water and electric supply to the heater.

2. Disconnecttheheaterfromthetapset.

3. Takethelteroutfromthettingsatcoldwaterinlet.

4. Cleanthelterandinstallthelterintotheformerposition.

5. Fixtheheateronthetapset.

6. Turntheowonandcheckforleaks.

7. Venttheinstallation(see„Venting”section).