Timberk H2O THU UL 15E (BL) [6/24] Attention

Timberk H2O THU UL 15E (BL) [6/24] Attention
www.timberk.com • electric humidifier
6
Automatic switching off when there is no water
When water level in the tank drops below the minimum allowed one, the
appliance’s ultrasonic membrane will automatically switch off and a red indicator
will light up on the control panel. To continue operation of the appliance it is
necessary to fill the tank with water according to item 6 «Filling of tank with
water», and then connect the appliance to the electric mains.
Switching off
To switch the appliance off, turn the on/off and steam outflow intensity knob all
the way to the left and disconnect the appliance from the electric mains.
Operation of THU UL 15E model
Switching on
Install the appliance to a true vertical on an even and dry surface, then
connect it to the power line, having filled the tank with water first. Press
button « » on the control panel, the appliance will automatically start
operating, and the operation mode indicator, steam outflow indicators and
the current temperature value will light up on the display.
At the very beginning of operation, the atomizing level may appear
unstable, which is caused by the temperature difference and water quality.
It will take some time for water to transform into steam in the ultrasonic
membrane and for this process to stabilize. In 10-25 minutes of operation,
the atomizing level will gradually stabilize.
Adjusting steam outflow intensity
To select the operation mode and adjust the steam outflow intensity, press
button « » on the control panel several times, the steam outflow intensity
will be changing: low, moderate, high, and the steam outflow intensity will
be shown by the operation mode indicator on the display: 1, 2, 3.
Comfortable conditions are reached at 40 to 60% relative air humidity. You
can determine the humidity level favorable for you either according to your
feelings or by using a special device called a hygrometer (not included in
the scope of supply), measuring the relative humidity level.
ATTENTION!
If a large amount of condensate is generated on the upper
part of the appliance when it is operating, then you need to
decrease the steam outflow intensity by turning the on/off
and steam outflow intensity knob counterclockwise.
Switch off timer
To set the switch off timer, press button « » on the control panel several
times, upon that the set time value of the timer until switching off will be
shown on the display.
SLEEP mode
The display brightness is automatically reduced in this mode.
To activate the SLEEP mode, press button « » on the control panel, upon
that the SLEEP mode indicator will be shown on the display. To deactivate
this mode, press button « » on the control panel again, upon that the
SLEEP mode indicator on the display will go off.
Automatic switching off when there is no water
When water level in the tank drops below the minimum allowed one, the
appliance’s ultrasonic membrane will automatically switch off and the no water
indicator « » will light up on the control panel. To continue operation of the
appliance it is necessary to fill the tank with water according to item 6 «Filling of
tank with water», and then connect the appliance to the electric mains.
Switching off
To switch the appliance off, press button « » on the control panel and
disconnect the appliance from the electric mains.
ATTENTION!
If a large amount of condensate is generated on the
upper part of the appliance and around it when it is
operating, then you need to decrease the steam outflow
intensity by pressing button « » on the control panel
and by selecting a less powerful operation mode.
NOTE:
In some modifications of the device (depends on a series
of delivery) use an automatic shutdown of the membrane
when removing the tank for protection from water spray in
case of careless handling. During operation of the device,
the tank can not be removed, it can lead to breakage.

Содержание

Похожие устройства

Скачать