Gorenje Power Slide VC2021PSBKBU 678666 [17/26] Storage
Макгруп McGrp.ru

Gorenje Power Slide VC2021PSBKBU 678666 [17/26] Storage

Превью страниц Страница 17 / 26
Gorenje Power Slide VC2021PSBKBU 678666 [17/26] Storage
17
flexible hose base, then pull to remove it
from the attachment point.
ROLLING THE CABLE OUT AND UP
• Pull out the cable to such a length that easy
working is ensured. Now connect the
appliance to the main supply. Press the
switch to activate the automatic rewinder
and hold on the mains plug for safety
reason.
FITTING TUBE AND ACCESSORIES
• Insert a flexible hose into a tube.
• Fit a nozzle to tube:
- Floor brush is intended for cleaning
bare floor and floor coverings.
- Crevice/furniture nozzle is for cleaning
corners and between cushions.
According to the mark rotate the nozzle
to brush position to clean curtain or
dust on the decorating surfaces.
Instruction for use
• Before using the appliance, unwind a
sufficient length of cord and insert the plug
into the power supply.
• Press the On/Off button to switch the unit
on. To stop it press the On/Off button again.
• You can adjust the air flow using the air flow
regulator on the flexible hose:
- decrease power for cleaning curtains,
books, furniture, etc.
- increase power for cleaning bare floor.
To rewind the cord, press the rewind button and
guide the cord with hand to ensure that it does
not whip causing damage.
Maintenance
1. Changing of the dust bag
• Always operate the cleaner with dust bag
installed.
• If you forget to attach the dust bag or attach
it in the wrong manner, the dust cover may
not close completely.
1. After removing the flexible tube, open the
front cover.
2. Rotate the support of the bag to the correct
position.
3. Remove the dust bag.
4. Replace the paper bag when it is full of dirty
and put in a new one.
5. Close the cover by passing down unitil it is
locked.
2. Cleaning filter
1. Open the cover for HEPA filter.
2. When open the cover for HEPA filter, use
your two fingers pulling ouch for HEPA,
then pulling HEPA up.
3. Take the HEPA out and change a clean
one.
4. Close the cover for HEPA filter.
Care and cleaning
Switch off the appliance and pull out the plug
from the power supply.
Clean the outside of the appliance with a soft
cloth with mild detergent. Harsh or abrasive
detergent will damage the outside surface.
Never immerse the appliance or cord into water
and other liquids.
CAUTION:
When the dust bin full indicator reaches the
middle of the window, clean the dust bin.
Never use the appliance without filters.
Do not use a washing machine to rinse filters. Do
not use a hair drier to dry them.
Storage
Parking system serves for parking suction
tube/floor nozzle during short-term interruptions.
For this purpose, please insert the holder of the
floor nozzle into parking rail of the device.

Содержание

140

Похожие устройства