D-Link DWL-660 [10/51] Getting started continued

Getting Started (continued)

Setting up a Wireless Ad Hoc Network

Install the Wireless PCI adapter(e.g., DWL-510) into the desktop computer.

(See the Quick Installation Guide included with the product for installation

instructions.)

Install the DWL-610 wireless Cardbus adapter into a laptop computer. (See

the Quick Installation Guide included with the product.)

Set the wireless configuration for the adapters to Ad-Hoc mode, set the

adapters to the same channel, and assign an IP Address to each computer

on the Ad-Hoc network. (See Box below)

IP Address

Desktop

When assigning IP Addresses to the computers on the network, please remember

that the IP Address for each computer must be in the same IP Address range

as all the computers in the network, and the subnet mask must be exactly the

same for all the computers in the network.

For example: If the first computer is assigned an IP Address of 192.168.0.2 with a

Subnet Mask of 255.255.255.0, then the second computer can be assigned an IP

Address of 192.168.0.3 with a Subnet Mask of 255.255.255.0, etc.

IMPORTANT: If computers or other devices are assigned the same IP Address,

one or more of the devices may not be visible on the network.