Maxwell MW-3044 [10/32] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Maxwell MW-3044 [10/32] English

Maxwell MW-3044 [10/32] English
10
ENGLISH
temperature (silk/wool). Cotton and linen items
should be ironed last.
•
If an item is made of mixed fabrics, the iron should
be set to the lowest temperature (for instance,
if an item is 60% polyester and 40% cotton, it
should be ironed at temperature used for polyes
-
ter ironing «•»).
•
If you cannot define the fabric structure, find a
spot that is inconspicuous when the item is being
worn and select the ironing temperature experi
-
mentally (always start with the lowest tempera-
ture and raise it gradually until you get the desired
result).
•
Corduroy and other fabrics that become glossy
quickly should be ironed strictly in one direction
(in the direction of the pile) with slight pressure.
•
To avoid appearance of glossy spots on synthetic
and silk fabrics, iron them backside.
SETTING THE IRONING TEMPERATURE
•
Place the iron on its base (9).
•
Insert the power plug into the mains socket.
•
Turn the knob (11) to set the required ironing tem-
perature: «•», «••», «•••», «max» (depending on
the type of fabric), the indicator (7) will light up.
•
Once the temperature of the soleplate (13) reach-
es the set point, the indicator (7) will go out and
you can start ironing.
Note:
•
If you are ironing at high temperature but you
need to switch to lower temperature, wait until
the soleplate temperature decreases and the
pilot lamp (7) lights up, and only then you may
start ironing.
WATER SPRAY
•
You can dampen the fabric by pressing the water
spray button (5) several times.
•
Make sure that there is enough water in the water
tank (10).
DRY IRONING
•
Place the iron on its base (9).
•
Insert the power plug into the mains socket.
•
Set the continuous steam supply knob (3) to the
position
– the steam supply is off.
•
Turn the knob (11) to set the required ironing tem-
perature: «•», «••», «•••», «max» (depending
on the type of fabric), the indicator (7) will light up.
•
Once the temperature of the soleplate (13) reach-
es the set point, the pilot lamp (7) will go out and
you can start ironing.
•
After you finish ironing, set the temperature con-
trol knob (11) to the «min» position.
•
Pull the power plug out of the mains socket and let
the iron cool down completely.
STEAM IRONING
While steam ironing it is necessary to set the ironing
temperature near the symbol «
» or «max».
•
Place the iron on its base (9).
•
Set the continuous steam supply knob (3) to the
position
– the steam supply is off.
•
Insert the power plug into the mains socket.
•
Make sure that there is enough water in the water
tank (10).
•
Turn the control knob (11) to set the required iron-
ing temperature: near the symbol « » or «max»,
the indicator (7) will light up.
•
When the soleplate (13) reaches the set tempera-
ture, the pilot lamp (7) will go out, you can start
ironing.
•
Turn the continuous steam supply knob (3) to the
position
, steam will start going out from the
soleplate (13) openings.
•
After you finish ironing, set the temperature con-
trol knob (11) to the position «min», and the con-
tinuous steam supply knob (3) to the position –
steam supply is off.
•
Pull the power plug out of the mains socket and let
the iron cool down completely.
ATTENTION!
If the steam is not constantly supplied during opera
-
tion, check whether the temperature control knob
(11) is set properly and there is water in the water
tank (10).
BURST OF STEAM
The burst of steam function is useful for ironing folds
and can only be used at high ironing temperatures
(when the iron temperature control knob (11) is set
near the symbol «
» or «max» ).
•
When pressing the burst of steam button (4)
steam will go out of the iron soleplate more inten
-
sively.
Note: To avoid water leakage from steam openings,
press the burst of steam button (4) with an interval no
less than 4-5 sec.
VERTICAL STEAM
Vertical steam function can be used only at high
ironing temperatures (that is when the tempera
-
ture control knob (11) is set near the symbol « »
or «max»).
Hold the iron vertically at the distance of 10-30 cm
from the clothes and press the burst of steam but
-
ton (4) with 4–5 second intervals, steam will be
released from the soleplate (13) intensively.
IMPORTANT INFORMATION: Vertical steaming is
not recommended for synthetic fabrics.
•
To avoid fabric melting, do not touch it with the
iron soleplate while steaming.
IM MW-3044.indd 10 12/15/17 3:02 PM

Содержание

Похожие устройства

Скачать