Corsair Graphite 780T CC-9011063-WW [7/37] Graphite serie

GRAPHITE SERIES

780T

109

ENGLISH

Frequently Asked Questions

1. How do I remove the I/O Panel ?

A. First, remove the front fascia by pushing in the three tabs from inside the fascia,

then push towards the front of the case.

B. Next, unscrew the 2 screws at each side of the panel.

2. Does the polarity matter with the I/O panel’s power and reset header?

No, only the LED headers.

3. Who should I contact if I received my case damaged or one of the fans is no

longer working?

Please go to corsair.force.com and request an RMA so that we can replace the

damaged part(s).

4. Where can I mount a fan?

Fan Mount Locations

Front 3 x 120 mm or 2 x 140 mm

Top 3 x 120 mm or 2 x 140 mm

Rear 1 x 120 mm or 1 x 140 mm

Bottom 2 x 120 mm

Side X

Mid X

5. How do I remove the front panel?

To remove the front panel, push the top corners of the plastic cover.

6. How do I remove the bottom dust ﬁlter(s)?

To remove the bottom dust ﬁlter, ﬁrst locate the pull out tab underneath the PSU,

then pull the bottom dust ﬁlter out.

7. How do I remove the Drive Cage?

Locate and remove the two screws securing the cage to the base on the bottom

of the case then pull the drive cage out. Drive cages are stackable and can be

installed on top of each other, or completely removed for improved cooling.

Note: Note: The HDD cage can also be

removed by removing the four screws

located directly under the base on the

bottom of the case.

To learn more about this case visit the product page at corsair.com