LG DS563X [52/54] Additional features
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

LG DS563X [52/54] Additional features

LG DS563X [52/54] Additional features
25
Operation
Additional Features
Last Scene Memory
This player memorizes last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the player or switch
off the player. If you load a disc that has the scene
memorized, the scene is automatically recalled.
Note:
This player does not memorize the scene of a disc if you
switch off the player before commencing to play the disc.
Screen Saver
The screen saver appears when you leave the DVD
player in Stop mode for about five minutes. If the
Screen Saver is displayed for five minutes, the DVD
Player automatically turns itself off.
System Select
You must select the appropriate system mode for your
TV system. If NO DISC appears in the display
window, press and hold PAUSE/STEP for more than 5
seconds to be able to select a system (PAL, NTSC, or
AUTO).
Video Mode Setting
• With certain discs, the playback picture may be
flickering or Dot Crawl is shown on straight lines.
That means Vertical interpolation or De-interlace is
not perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
video mode.
• To change the video mode, press and hold
DISPLAY about 3 seconds during disc playback.
The new video mode number selected is displayed
on the TV screen. Check whether the video quality
has improved. If not, repeat the above procedure
until picture quality is improved.
• Video mode change sequence:
MODE1 → MODE2 → MODE3 → MODE1
•
If you turn off the power, the video mode will be
back to initial state (MODE1).
Detailed Descriptions for Video Modes
MODE1: The source material of the DVD video (film material
or video material) is determined from disc information.
MODE2: Suitable for playing film based content or video
based material recorded by the progressive scan method.
MODE3: Suitable for playing video based content with
comparatively little motion.
Note:
The video mode setting only works when the
Progressive Scan mode is set to “On” in the Setup
menu.
Controlling other TVs with the remote control
You can control the sound level, input source, and
power switch of your LG TV with the supplied remote
control.
You can control the sound level, input source, and
power switch of non-LG TVs as well. If your TV is
listed in the table below, set the appropriate
manufacturer code.
1. While holding down TV POWER button, press the
number buttons to select the manufacturer code
for your TV (see the table below).
2. Release TV POWER button.
Code numbers of controllable TVs
If more than one code number is listed, try entering
them one at a time until you find the one that works
with your TV.
Manufacturer Code Number
LG / GoldStar 1 (Default), 2
Zenith 1, 3, 4
Samsung 6, 7
Sony 8, 9
Hitachi 4
Notes:
• Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code.
• If you enter a new code number, the code number
previously entered will be erased.
• When you replace the batteries of the remote, the code
number you have set may be reset to the default setting.
Set the appropriate code number again.
VCD1.1
CDDVD

Содержание

Похожие устройства

Detailed Descriptions for Video Modes Last Scene Memory DVD CD This player memorizes last scene from the last disc that is viewed The last scene remains in memory even if you remove the disc from the player or switch off the player If you load a disc that has the scene memorized the scene is automatically recalled Note This player does not memorize the scene of a disc it you switch off the player before commencing to play the disc Screen Saver The screen saver appears when you leave the DVD player in Stop mode for about five minutes If the Screen Saver is displayed for five minutes the DVD Player automatically turns itself off System Select You must select the appropriate system mode for your TV system If NO DISC appears in the display window press and hold PAUSE STEP for more than 5 seconds to be able to select a system PAL NTSC or AUTO Video Mode Setting With certain discs the playback picture may be flickering or Dot Crawl is shown on straight lines That means Vertical interpolation or De interlace is not perfectly matched with the disc In this case the picture quality may be improved by changing the video mode To change the video mode press and hold DISPLAY about 3 seconds during disc playback The new video mode number selected is displayed on the TV screen Check whether the video quality has improved If not repeat the above procedure until picture quality is improved Video mode change sequence MODE1 MODE2 MODE3 MODE1 If you turn off the power the video mode will be back to initial state MODE1 M0DE1 The source material of the DVD video film material or video material is determined from disc information M0DE2 Suitable for playing film based content or video based material recorded by the progressive scan method M0DE3 Suitable for playing video based content with comparatively little motion Note The video mode setting only works when the Progressive Scan mode is set to On in the Setup menu Controlling other TVs with the remote control You can control the sound level input source and power switch of your LG TV with the supplied remote control You can control the sound level input source and power switch of non LG TVs as well If your TV is listed in the table below set the appropriate manufacturer code 1 While holding down TV POWER button press the number buttons to select the manufacturer code for your TV see the table below 2 Release TV POWER button Code numbers of controllable TVs If more than one code number is listed try entering them one at a time until you find the one that works with your TV Manufacturer Code Number LG GoldStar 1 Default 2 Zenith Samsung Sony 1 3 4 6 7 8 9 Hitachi 4 Notes Depending on your TV some or all buttons may not function on the TV even after entering the correct manufacturer code If you enter a new code number the code number previously entered will be erased When you replace the batteries of the remote the code number you have set may be reset to the default setting Set the appropriate code number again Operation Additional Features

Скачать
Случайные обсуждения

Ответы 1

Как подключить DVD-плеер к телевизору?
1 год назад

Ответы 1

Как подключить дополнительное звуковое оборудование?
1 год назад