![Gigabyte GA-880G-UD3H (rev.1.x) [46/104] Amd c1e support](/img/pdf.png)
Gigabyte GA-880G-UD3H (rev.1.x) [46/104] Amd c1e support
![Gigabyte GA-880G-UD3H (rev.1.x) [46/104] Amd c1e support](/views2/1045456/page46/bg2e.png)
BIOS Setup - 46 -
2-5 Advanced BIOS Features
IGX Conguration
The settings in this submenu are synchronous to those under the same items on the MB Intelligent
Tweaker(M.I.T.) main menu.
AMD C1E Support
Enables or disables the C1E CPU power-saving function in system halt state. When enabled, the power
consumption will be reduced during system halt state.
Auto If a CPU that supports hardware C1E is installed, the BIOS will automatically enable the
hardware C1E function. If not, the C1E function will be disabled. (Default)
Enabled If a CPU that supports hardware C1E is installed, the BIOS will automatically enable the
hardware C1E function. If not, the BIOS will enable the software C1E function.
Disabled Disables the C1E function.
Virtualization
Virtualization allows a platform to run multiple operating systems and applications in independent parti-
tions. With virtualization, one computer system can function as multiple virtual systems.
(Default: Disabled)
AMD K8 Cool&Quiet control
Auto Lets the AMD Cool'n'Quiet driver dynamically adjust the CPU clock and VID to
reduce heat output from your computer and its power consumption. (Default)
Disabled Disables this function.
Hard Disk Boot Priority
Species the sequence of loading the operating system from the installed hard drives. Use the up or
down arrow key to select a hard drive, then press the plus key <+> (or <PageUp>) or the minus key <-> (or
<PageDown>) to move it up or down on the list. Press <Esc> to exit this menu when nished.
First/Second/Third Boot Device
Species the boot order from the available devices. Use the up or down arrow key to select a device
and press <Enter> to accept. Options are: Floppy, LS120, Hard Disk, CDROM, ZIP, USB-FDD, USB-ZIP,
USB-CDROM, USB-HDD, Legacy LAN, Disabled.
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
Advanced BIOS Features
IGXConguration [PressEnter]
AMD C1E Support [Auto]
Virtualization [Disabled]
AMD K8 Cool&Quiet control [Auto]
Hard Disk Boot Priority [Press Enter]
First Boot Device [Hard Disk]
Second Boot Device [CDROM]
Third Boot Device [Floppy]
Password Check [Setup]
HDD S.M.A.R.T. Capability [Disabled]
Away Mode [Disabled]
Full Screen LOGO Show [Enabled]
Backup BIOS Image to HDD [Disabled]
Init Display First [PCI Slot]
higf
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level
Содержание
- Ga 880g ud3h 1
- User s manual 1
- 2010 giga byte technology co ltd all rights reserved the trademarks mentioned in this manual are legally registered to their respective owners 3
- Copyright 3
- Disclaimer 3
- Documentation classifications 3
- Example 3
- For product related information check on our website at http www gigabyte com 3
- Identifying your motherboard revision 3
- In order to assist in the use of this product gigabyte provides the following types of documentations 3
- Information in this manual is protected by copyright laws and is the property of gigabyte changes to the specifications and features in this manual may be made by gigabyte with out prior notice no part of this manual may be reproduced copied translated transmitted or published in any form or by any means without gigabyte s prior written permission 3
- The revision number on your motherboard looks like this rev x x for example rev 1 means the revision of the motherboard is 1 check your motherboard revision before updating motherboard bios drivers or when looking for technical information 3
- Box contents optional items 4
- Chapter 1 hardware installation 4
- Chapter 2 bios setup 3 4
- Ga 880g ud3h motherboard layout ga 880g ud3h motherboard block diagram 4
- Table of contents 4
- Chapter 3 drivers installation 9 5
- Chapter 4 unique features 3 5
- Chapter 5 appendix 7 5
- Box contents 6
- Optional items 6
- Ga 880g ud3h 7
- Ga 880g ud3h motherboard layout 7
- Note the pciex1_2 and pciex1_3 slots share bandwidth with the pciex4_1 slot when the pciex4_1 slot is popu lated with a x4 card the pciex1_2 and pciex1_3 slots become unavailable 7
- Ga 880g ud3h motherboard block diagram 8
- 1 installation precautions 9
- Chapter 1 hardware installation 9
- 2 product specifications 10
- 3 1 installing the cpu 13
- 3 installing the cpu and cpu cooler 13
- 3 2 installing the cpu cooler 15
- 4 1 dual channel memory configuration 16
- 4 installing the memory 16
- 4 2 installing a memory 17
- 5 installing an expansion card 18
- 6 setup of the ati hybrid crossfirex configuration 19
- 6 setupoftheatihybridcrossfire 19
- A systemrequirements 19
- B connectingthegraphicscards 19
- C bios setup 19
- Configuration 19
- D configuringthegraphicsdriver 19
- 7 back panel connectors 20
- D sub port 20
- Dvi d por 20
- Hdmi por 20
- Ps 2 keyboard or ps 2 mouse port 20
- Usb 2 1 port 20
- A dual display configurations 21
- B playback of hd dvd and blu ray discs 21
- Ieee 1394a port 21
- Optical s pdif out connector 21
- Rj 45 lan port 21
- Center subwoofer speaker out jack orange 22
- Line in jack blue 22
- Line out jack green 22
- Mic in jack pink 22
- Rear speaker out jack black 22
- Side speaker out jack gray 22
- 8 internal connectors 23
- 2 atx_12v_2x4 atx 2x4 12v power connector and 2x12 main power connector 24
- Hardware installation 24 24
- To meet expansion requirements it is recommended that a power supply that can withstand high power consumption be used 500w or greater if a power supply is used that does not provide the required power the result can lead to an unstable or unbootable system 24
- With the use of the power connector the power supply can supply enough stable power to all the com ponents on the motherboard before connecting the power connector first make sure the power supply is turned off and all devices are properly installed the power connector possesses a foolproof design connect the power supply cable to the power connector in the correct orientation the 12v power con nector mainly supplies power to the cpu if the 12v power connector is not connected the computer will not start 24
- 25 hardware installation 25
- 4 5 cpu_fan sys_fan1 sys_fan2 pwr_fan fan headers 25
- Be sure to connect fan cables to the fan headers to prevent your cpu and system from over 25
- Fdd floppy disk drive connector 25
- Headers 25
- Heating overheating may result in damage to the cpu or the system may hang 25
- The motherboard has a 4 pin cpu fan header cpu_fan a 3 pin sys_fan2 and a 4 pin sys_ fan1 system fan headers and a 3 pin power fan header pwr_fan most fan headers possess a foolproof insertion design when connecting a fan cable be sure to connect it in the correct orientation the black connector wire is the ground wire the motherboard supports cpu fan speed control which requires the use of a cpu fan with fan speed control design for optimum heat dissipation it is recom mended that a system fan be installed inside the chassis 25
- These fan headers are not configuration jumper blocks do not place a jumper cap on the 25
- This connector is used to connect a floppy disk drive the types of floppy disk drives supported are 360 kb 720 kb 1 mb 1 4 mb and 2 8 mb before connecting a floppy disk drive be sure to locate pin 1 of the connector and the floppy disk drive cable the pin 1 of the cable is typically designated by a stripe of different color for purchasing the optional floppy disk drive cable please contact the local dealer 25
- A raid 0 or raid 1 configuration requires at least two hard drives if more than two hard 26
- A raid 10 configuration requires four hard drives 26
- Drives are to be used the total number of hard drives must be an even number 26
- Hardware installation 26 26
- Ide ide connector 26
- Pin no definition 26
- Please connect the l shaped end of the sata cable to your sata hard drive 26
- Sata2_0 1 2 3 4 5 sata 3gb s connectors controlled by amd sb710 26
- The ide connector supports up to two ide devices such as hard drives and optical drives before attach ing the ide cable locate the foolproof groove on the connector if you wish to connect two ide devices remember to set the jumpers and the cabling according to the role of the ide devices for example master or slave for information about configuring master slave settings for the ide devices read the instructions from the device manufacturers 26
- The sata connectors conform to sata 3gb s standard and are compatible with sata 1 gb s standard each sata connector supports a single sata device the amd sb710 controller supports raid 0 raid 1 raid 10 and jbod refer to chapter 5 configuring sata hard drive s for instructions on configur ing a raid array 26
- F_panel front panel header 27
- Audio signals will be present on both of the front and back panel audio connections simultane 28
- Cd_in cd in connector 28
- F_audio front panel audio header 28
- Front panel audio module refer to the instructions on how to activate ac 97 functionality via the audio software in chapter 5 configuring 2 4 5 7 channel audio 28
- Hardware installation 28 28
- Instead of a single plug for information about connecting the front panel audio module that has different wire assignments please contact the chassis manufacturer 28
- Ously if you want to mute the back panel audio only supported when using an hd front panel audio module refer to chapter 5 configuring 2 4 5 7 channel audio 28
- Some chassis provide a front panel audio module that has separated connectors on each wire 28
- The front panel audio header supports hd audio by default if your chassis provides an ac 97 28
- The front panel audio header supports intel high definition audio hd and ac 97 audio you may connect your chassis front panel audio module to this header make sure the wire assignments of the module con nector match the pin assignments of the motherboard header incorrect connection between the module connector and the motherboard header will make the device unable to work or even damage it 28
- You may connect the audio cable that came with your optical drive to the header 28
- 29 hardware installation 29
- Cord from the power outlet to prevent damage to the usb bracket 29
- Do not plug the ieee 1394 bracket 2x5 pin cable into the usb header prior to installing the usb bracket be sure to turn off your computer and unplug the power 29
- F_usb1 f_usb2 f_usb3 usb headers 29
- Spdif_io s pdif in out header 29
- The headers conform to usb 2 1 specification each usb header can provide two usb ports via an optional usb bracket for purchasing the optional usb bracket please contact the local dealer 29
- This header supports digital s pdif in out via an optional s pdif in and out cable this header can connect to an audio device that supports digital audio out and an audio system that supports digital au dio in for purchasing the optional s pdif in and out cable please contact the local dealer 29
- Do not plug the usb bracket cable into the ieee 1394a header prior to installing the ieee 1394a bracket be sure to turn off your computer and unplug the 30
- F_1394_1 f_1394_2 ieee 1394a headers 30
- Hardware installation 30 30
- Lpt parallel port header 30
- Power cord from the power outlet to prevent damage to the ieee 1394a bracket 30
- The headers conform to ieee 1394a specification the ieee 1394a header can provide one ieee 1394a port via an optional ieee 1394a bracket for purchasing the optional ieee 1394a bracket please con tact the local dealer 30
- The lpt header can provide one parallel port via an optional lpt port cable for purchasing the optional lpt port cable please contact the local dealer 30
- Then attach the other end of the cable to the ieee 1394a device ensure that the cable is se curely connected 30
- To connect an ieee 1394a device attach one end of the device cable to your computer and 30
- 31 hardware installation 31
- After clearing the cmos values and before turning on your computer be sure to remove the 31
- After system restart go to bios setup to load factory defaults select load optimized de 31
- Always turn off your computer and unplug the power cord from the power outlet before clear 31
- Clr_cmos clearing cmos jumper 31
- Com serial port header 31
- Faults or manually configure the bios settings refer to chapter 2 bios setup for bios configurations 31
- Ing the cmos values 31
- Jumper cap from the jumper failure to do so may cause damage to the motherboard 31
- The com header can provide one serial port via an optional com port cable for purchasing the op tional com port cable please contact the local dealer 31
- Use this jumper to clear the cmos values e g date information and bios configurations and reset the cmos values to factory defaults to clear the cmos values place a jumper cap on the two pins to temporarily short the two pins or use a metal object like a screwdriver to touch the two pins for a few seconds 31
- Bat battery 32
- Chapter 2 bios setup 33
- 1 startup screen 34
- A the logo screen default 34
- B the post screen 34
- 2 the main menu 35
- Bios setup program function keys 35
- Sample bios version f4a 35
- Advanced bios features 36
- Exit without saving 36
- Integrated peripherals 36
- Keys for the main menu only 36
- Load fail safe defaults 36
- Load optimized defaults 36
- Mb intelligent tweaker m i t 36
- Pc health status 36
- Pnp pci configurations 36
- Power management setup 36
- Save exit setup 36
- Set supervisor password 36
- Set user password 36
- Standard cmos features 36
- 3 mb intelligent tweaker m i t 37
- 37 bios setup 37
- Dent on your overall system configurations incorrectly doing overclock overvoltage may result in damage to cpu chipset or memory and reduce the useful life of these components this page is for advanced users only and we recommend you not to alter the default settings to prevent system instability or other unexpected results inadequately altering the settings may result in system s failure to boot if this occurs clear the cmos values and reset the board to default values 37
- Note this item is present only if you install a cpu that supports this feature 37
- System voltage control item to auto to optimize the system voltage settings 37
- When the system voltage optimized item blinks in red it is recommended that you set the 37
- Whether the system will work stably with the overclock overvoltage settings you made is depen 37
- A message which says bios is updating ec firmware don t turn off or reset system will appear wait for a few seconds and the system will automatically restart for the settings to take effect 38
- Advanced clock calibration 38
- All cores all cores configures advanced clock calibration for all cpu cores 38
- Allows you to determine whether to enable advanced clock calibration when using an amd black edi tion cpu 38
- Allows you to determine whether to manually enable disable cpu core 1 2 3 4 5 38
- Auto auto lets the bios to configure the settings to defaults 38
- Auto auto lets the bios to enable all cpu cores number of cores available depends on the 38
- Bios setup 38 38
- Cpu being used default cpu being used default 38
- Cpu core 0 38
- Cpu core 1 2 3 4 38
- Cpu core control 38
- Disabled disabled disables this function default 38
- Ec firmware selection 38
- Enables or disables cpu core 2 default enabled 38
- Hybrid hybrid uses the specific amd ec firmware version 38
- Individually configures advanced clock calibration for each cpu core 38
- Manual manual allows you to individually enable disable cpu core 1 2 3 4 5 38
- Normal normal uses the standard amd ec firmware version default 38
- Note this item is present only if you install a cpu that supports this feature 38
- Options are 12 12 options are 12 12 38
- Per core per cor 38
- This option is configurable only when advanced clock calibration is set to all cores 38
- This option is configurable only when advanced clock calibration is set to per core 38
- This setting is fixed cpu core 0 is always enabled 38
- Value all cores 38
- Value core 0 value core 1 38
- Value core 2 38
- Value core 3 38
- Igx configuration 39
- Internal graphics mode 39
- Onboard vga output connect 39
- Surround view 39
- Uma frame buffer size 39
- Vga core clock control 39
- Vga core clock mhz 39
- Core performance boos 40
- Cpb rati 40
- Cpu clock ratio 40
- Cpu frequency mhz 40
- Cpu host clock control 40
- Cpu northbridge freq 40
- Ht link frequency 40
- Ht link width 40
- Memory clock 40
- Pcie clock mhz 40
- Set memory clock 40
- Turbo cp 40
- 41 bios setup 41
- Allows you to set memory control mode 41
- Cas latency 41
- Dcts mode 41
- Ddr3 timing items 41
- Dram configuration 41
- Ganged ganged sets memory control mode to single dual channel 41
- Manual allows all ddr3 timing items below to be configurable 41
- Minimum ras active time 41
- Options are auto default 15t 30t 41
- Options are auto default 1t 2t 41
- Options are auto default 4t 12t 41
- Options are auto default 4t 7t 41
- Options are auto default 5t 12t 41
- Options are auto default 90ns 110ns 160ns 300ns 350ns 41
- Options are auto default manual options are auto default manual 41
- Ras to cas r w delay 41
- Row precharge time 41
- T 2t command timing 41
- Trfc0 for dimm1 41
- Trfc1 for dimm3 41
- Trfc2 for dimm2 41
- Twtr command delay 41
- Unganged unganged sets memory control mode to two single channel default 41
- Bank interleaving 42
- Channel interleave 42
- Cpu nb vid control 42
- Ddr3 voltage control 42
- Northbridge volt control 42
- Precharge time 42
- Ras to ras delay 42
- Row cycle time 42
- Southbridge volt control 42
- System voltage control 42
- Trfc3 for dimm4 42
- Write recovery time 42
- Cpu voltage control 43
- Normal cpu vcore 43
- 4 standard cmos features 44
- Access mode access mode sets the hard drive access mode options are auto default chs lba large 44
- Access mode access mode sets the hard drive access mode options are auto default large 44
- Auto lets the bios automatically detect ide sata devices during the post default 44
- Bios setup 44 44
- Configure your ide sata devices by using one of the two methods below configure your ide sata devices by using one of the two methods below 44
- Date mm dd yy 44
- Extended ide drive extended ide drive 44
- Ide auto detection 44
- Ide channel 0 1 master slave 44
- Ide channel 0 1 master slave ide channel 0 1 master slave 44
- Ide channel 2 3 master slave 44
- Ide hdd auto detection 44
- None if no ide sata devices are used set this item to none so the system will skip 44
- Sets the system date the date format is week read only month date and year select the desired field and use the up arrow or down arrow key to set the date 44
- Sets the system time for example 1 p m is 13 0 0 select the desired field and use the up arrow or down arrow key to set the time 44
- The detection of the device during the post for faster system startup the detection of the device during the post for faster system startup 44
- Time hh mm ss 44
- To autodetect the parameters of the ide sata device on this channel 44
- Drive a 45
- Floppy 3 mode support 45
- Halt on 45
- Memory 45
- 5 advanced bios features 46
- Amd c1e support 46
- Amd k8 cool quiet control 46
- Auto auto if a cpu that supports hardware c1e is installed the bios will automatically enable the 46
- Auto lets the amd cool n quiet driver dynamically adjust the cpu clock and vid to 46
- Bios setup 46 46
- Default disabled default disabled 46
- Disabled disabled disables the c1e function 46
- Disabled disabled disables this function 46
- Enabled enabled if a cpu that supports hardware c1e is installed the bios will automatically enable the 46
- Enables or disables the c1e cpu power saving function in system halt state when enabled the power consumption will be reduced during system halt state 46
- First second third boot device 46
- Hard disk boot priority 46
- Hardware c1e function if not the bios will enable the software c1e function hardware c1e function if not the bios will enable the software c1e function 46
- Hardware c1e function if not the c1e function will be disabled default hardware c1e function if not the c1e function will be disabled default 46
- Igx configuration 46
- Reduce heat output from your computer and its power consumption default reduce heat output from your computer and its power consumption default 46
- The settings in this submenu are synchronous to those under the same items on the mb intelligent tweaker m i t main menu 46
- To accept options are floppy ls120 hard disk cdrom zip usb fdd usb zip usb cdrom usb hdd legacy lan disabled 46
- To exit this menu when finished 46
- Virtualization 46
- Virtualization allows a platform to run multiple operating systems and applications in independent parti tions with virtualization one computer system can function as multiple virtual systems 46
- Away mode 47
- Backup bios image to hdd 47
- Full screen logo show 47
- Hdd s m a r t capability 47
- Init display first 47
- Password check 47
- 6 integrated peripherals 48
- Ahci ahci configures the sata controllers to ahci mode advanced host controller interface 48
- Ahci is an interface specification that allows the storage driver to enable advanced ahci is an interface specification that allows the storage driver to enable advanced 48
- Allows you to decide whether to activate the boot rom integrated with the onboard lan chip 48
- As sata type the mode depends on the as sata type the mode depends on the onchip sata type settings 48
- Bios setup 48 48
- Configures the operating mode of the integrated sata2_0 sata2_3 controller 48
- Default disabled default disabled 48
- Enable native ide mode if you wish to install operating systems that support native enable native ide mode if you wish to install operating systems that support native 48
- Enables or disables the integrated sata controller default enabled 48
- Enables or disables the onboard lan function default enabled if you wish to install a 3rd party add in network card instead of using the onboard lan set this item to disabled 48
- Ide ide disables raid for the sata controller and configures the sata controller to pata 48
- Mode default mode default 48
- Mode mode 48
- Native ide native ide allows the sata controller to operate in native ide mode default 48
- Onboard lan boot rom 48
- Onboard lan function 48
- Onchip sata controller 48
- Onchip sata port4 5 type sata2_4 sata2_5 connectors 48
- Onchip sata type sata2_0 sata2_3 connectors 48
- Raid raid enables raid for the sata controller 48
- Serial ata features such as native command queuing and hot plug serial ata features such as native command queuing and hot plug 48
- This option is configurable only when onchip sata type is set to raid or ahci configures the oper ating mode of the integrated sata2_4 sata2_5 connectors 48
- Smart lan lan cable diagnostic function 49
- Ecp mode use dma 50
- Onboard 1394 function 50
- Onboard audio function 50
- Onboard parallel port 50
- Onboard serial port 1 50
- Parallel port mode 50
- Usb controllers 50
- Usb legacy function 50
- Usb storage function 50
- 51 bios setup 51
- 7 power management setup 51
- Acpi suspend type 51
- Allows the system to be awakened from acpi s3 sleep state by a wake up signal from the installed usb device default enabled 51
- Allows the system to be awakened from an acpi sleep state by a wake up signal from a modem that supports wake up function default disabled 51
- Allows the system to be awakened from an acpi sleep state by a wake up signal from a pci or pcie de vice note to use this function you need an atx power supply providing at least 1a on the 5vsb lead default enabled 51
- Button is pressed for less than 4 seconds the system will enter suspend mode button is pressed for less than 4 seconds the system will enter suspend mode 51
- Configures the way to turn off the computer in ms dos mode using the power button 51
- Delay 4 sec delay 4 sec press and hold the power button for 4 seconds to turn off the system if the power 51
- In s1 sleep state the system appears suspended and stays in a low power mode in s1 sleep state the system appears suspended and stays in a low power mode 51
- In s3 sleep state the system appears to be off and consumes less power than in in s3 sleep state the system appears to be off and consumes less power than in 51
- Instant off instant off press the power button and then the system will be turned off instantly default 51
- Its working state exactly where it was left off its working state exactly where it was left off 51
- Modem ring resume 51
- Note supported on windows 7 vista operating system only 51
- Pme event wake up 51
- S1 pos s1 pos enables the system to enter the acpi s1 power on suspend sleep state 51
- S3 str s3 str enables the system to enter the acpi s3 suspend to ram sleep state default 51
- Soft off by power button 51
- Specifies the acpi sleep state when the system enters suspend 51
- The s1 state when signaled by a wake up device or event the system resumes to the s1 state when signaled by a wake up device or event the system resumes to 51
- The system can be resumed at any time the system can be resumed at any time 51
- Usb wake up from s3 51
- Ac back function 52
- Erp support 52
- Hpet suppor 52
- Kb power on password 52
- Power on by alarm 52
- Power on by keyboard 52
- Power on by mouse 52
- 4 5 7 9 10 11 12 14 15 3 4 5 7 9 10 11 12 14 15 assigns irq 3 4 5 7 9 10 11 12 14 15 to the first pci slot 53
- 4 5 7 9 10 11 12 14 15 3 4 5 7 9 10 11 12 14 15 assigns irq 3 4 5 7 9 10 11 12 14 15 to the second pci slot 53
- 53 bios setup 53
- 8 pnp pci configurations 53
- Auto bios auto assigns irq to the first pci slot default 53
- Auto bios auto assigns irq to the second pci slot default 53
- Pci1 irq assignment 53
- Pci2 irq assignment 53
- 9 pc health status 54
- Bios setup 54 54
- Case opened 54
- Displays the detection status of the chassis intrusion detection device attached to the motherboard ci header if the system chassis cover is removed this field will show yes otherwise it will show no to clear the chassis intrusion status record set reset case open status to enabled save the settings to the cmos and then restart your system 54
- Enables or disables the cpu overheating protection function when enabled the cpu core voltage and ratio will be reduced when the cpu is overheated default enabled 54
- Hardware thermal control 54
- Keeps or clears the record of previous chassis intrusion status enabled clears the record of previous chassis intrusion status and the case opened field will show no at next boot default disabled 54
- Reset case open status 54
- Cpu smart fan control 55
- Cpu smart fan mode 55
- Cpu system power fan fail warning 55
- Cpu warning temperature 55
- Current cpu system power fan speed rpm 55
- Current system cpu temperature 55
- Current voltage v vcore ddr3 1 v 3 v 12v 55
- System smart fan control 55
- 10 load fail safe defaults 56
- 11 load optimized defaults 56
- Bios setup 56 56
- Key to load the optimal bios default settings the bios defaults settings help the system to operate in optimum state always load the optimized defaults after updating the bios or after clearing the cmos values 56
- Key to load the safest bios default settings in case system instability occurs you may try to load fail safe defaults which are the safest and most stable bios settings for the motherboard 56
- 12 set supervisor user password 57
- 57 bios setup 57
- Again the message password disabled will appear indicating the password has been can celled 57
- Supervisor password 57
- The bios setup program allows you to specify two separate passwords 57
- User password 57
- When a system password is set and the when a system password is set and the password check item in advanced bios features is set to setup you must enter the supervisor password for entering bios setup and making bios changes 57
- When the when the password check item is set to system you must enter the supervisor password or user password at system startup and when entering bios setup 57
- When the when the password check item is set to system you must enter the supervisor password or user password at system startup to continue system boot in bios setup you must enter the supervisor password if you wish to make changes to bios settings the user password only allows you to view the bios settings but not to make changes 57
- 13 save exit setup 58
- 14 exit without saving 58
- Bios setup 58 58
- To return to the bios setup main menu 58
- 1 installing chipset drivers 59
- Chapter 3 drivers installation 59
- 2 application software 60
- 3 technical manuals 60
- 4 contact 61
- 5 system 61
- 6 download center 62
- 7 new utilities 62
- 1 xpress recovery2 63
- Before you begin 63
- Chapter 4 unique features 63
- Installation and configuration 63
- System requirements 63
- 2 1 updating the bios with the q flash utility 66
- 2 bios update utilities 66
- A before you begin 66
- 67 unique features 67
- B updating the bios 67
- Do not turn off or restart the system when the system is reading updating the bios do not remove the floppy disk usb flash drive or hard drive when the system is updat 67
- Ing the bios 67
- Key during the post to access q flash 67
- Make sure the bios update file matches your motherboard model 67
- Step 3 when the update process is complete press any key to return to the main menu 67
- The save main bios to drive option allows you to save the current bios file q flash only supports usb flash drive or hard drives using fat32 16 12 file system if the bios update file is saved to a hard drive in raid ahci mode or a hard drive attached to 67
- To begin the bios update the monitor will display the update process 67
- When updating the bios choose the location where the bios file is saved the following procedure as sumes that you save the bios file to a floppy disk 67
- To exit q flash and reboot the system as the system boots you should see the new bios version is present on the post screen 68
- To load bios defaults 68
- To load bios defaults system will re detect all peripheral devices after a bios update so we recommend that you reload bios defaults 68
- To save settings to cmos and exit bios setup the proce dure is complete after the system restarts 68
- Unique features 68 68
- 2 2 updating the bios with the bios utility 69
- A before you begin 69
- B using bios 69
- C after updating the bios 69
- 3 easytune 6 70
- Gigabyte s easytune 6 is a simple and easy to use interface that allows users to fine tune their system settings or do overclock overvoltage in windows environment the user friendly easytune 6 interface also includes tabbed pages for cpu and memory information letting users read their system related information without the need to install additional software 70
- Tab function 70
- Tabs information 70
- The easytune 6 interface 70
- Unique features 70 70
- 4 easy energy saver 71
- Meter mode button information table 71
- The easy energy saver interface a meter mode 71
- B total mode 72
- C stealth mode 72
- Total mode button information table 72
- 5 q share 73
- Directions for using q share 73
- Options descriptions 73
- 6 smart recovery 74
- 7 auto green 75
- 75 unique features 75
- Auto green is an easy to use tool that provides users with simple options to enable system power savings via a bluetooth cell phone when the phone is out of the range of the computer s bluetooth receiver the sys tem will enter the specified power saving mode 75
- Configuring other bluetooth settings 75
- Configuring the bluetooth cell phone key 75
- Selecting a system energy saving mode 75
- The configuration dialog box 75
- 1 1 configuring the onboard sata controller 77
- 1 configuring sata hard drive s 77
- A installing sata hard drive s in your computer 77
- Before you begin 77
- Chapter 5 appendix 77
- To configure sata hard drive s follow the steps below 77
- Appendix 78 78
- B configuring sata controller mode in bios setup 78
- Figure 1 78
- Make sure to configure the sata controller mode correctly in system bios setup 78
- Step 2 save changes and exit bios setup 78
- The bios setup menus described in this section may differ from the exact settings for your moth erboard the actual bios setup menu options you will see shall depend on the motherboard you have and the bios version 78
- To enter bios setup during the post power on self test ensure onchip sata controller is enabled under integrated peripherals to enable raid for the sata2_0 1 2 3 connectors set onchip sata type to raid to enable raid for the sata2_4 5 connectors set onchip sata type to raid and set onchip sata port4 5 type to as sata type figure 1 78
- C configuring raid set in raid bios 79
- Appendix 80 80
- Figure 4 80
- Figure 5 80
- To enter the define ld menu window figure 4 the define ld selection from the main menu allows users to begin the process of manually defining the drive elements and raid levels for one or multiple disk arrays 80
- To enter the raid configuration menu figure 5 80
- 81 appendix 81
- After the creation is complete the screen will return to define ld menu where you will see the newly 81
- Again if you want to exit the raid bios utility 81
- Created array 81
- Disk array the total drv section will show the number of disks assigned 81
- Figure 6 81
- Figure 7 81
- Figure 8 81
- Keys to save the information the window below will appear 81
- Mum capacity 81
- To change the assignment option to y this action adds the drive to the 81
- To clear the mbr or press other keys to ignore this option then the window below 81
- To set the capacity of the raid array or press other keys to set the array to its maxi 81
- View drive assignments the view drive assignments option in the main menu displays whether the attached hard drives are as signed to a disk array or are unassigned under the assignment column drives are labeled with their as signed disk array or shown as free if unassigned 81
- Will appear 81
- Appendix 82 82
- Delete an array the delete array menu option allows for deletion of disk array assignments 82
- Deleting an existing disk array could result in loss of data record all array information including the array type the disk members and stripe block size in case you wish to undo a deletion 82
- Figure 9 82
- If you are sure to delete the array or other keys to abort 82
- In the main menu to enter the delete ld menu then highlight the array you 82
- The view ld definition menu will appear as shown in figure 9 showing which drives are assigned to 82
- To return to main menu 82
- 1 2 making a sata raid ahci driver diskette 83
- 83 appendix 83
- Copy d bootdrv sbxxx x86 83
- Figure 1 83
- For the sata driver directories for different windows operating systems for the sata driver directories for different windows operating systems 83
- In ms dos mode prepare a startup disk that has cd rom support and a blank formatted floppy disk steps 1 boot from the startup disk 2 remove the startup disk and insert the prepared floppy disk and the motherboard driver disk here we as 83
- Note type the driver directory based on the operating system to be installed refer to the following table 83
- Required for ahci and raid mode 83
- Sume that the drive letter for your optical drive is d 83
- To successfully install operating system onto sata hard drive s that is are configured to raid ahci mode you need to install the sata controller driver during the os installation without the driver the hard drive may not be recognized during the windows setup process first of all copy the driver for the sata controller from the motherboard driver disk to a floppy disk for installing windows vista you also can copy the sata con troller driver from the motherboard driver disk to a usb flash drive see the instructions below about how to copy the driver in ms dos and windows mode 83
- 1 3 installing the sata raid ahci driver and operating system 85
- A installing windows xp 85
- B installing windows vista 86
- 2 1 configuring 2 4 5 7 channel audio 89
- 2 configuring audio input and output 89
- A configuring speakers 89
- B configuring sound effect 90
- C activating an ac 97 front panel audio module 90
- D muting the back panel audio for hd audio only 90
- 2 2 configuring s pdif in out 91
- A installing the s pdif in and out cable 91
- B configuring s pdif in 91
- C configuring s pdif out 92
- 2 3 enabling the dolby home theater function 93
- 2 4 configuring microphone recording 94
- Enabling stereo mix 95
- 2 5 using the sound recorder 96
- A recording sound 96
- B playing the recorded sound 96
- 3 1 frequently asked questions 97
- 3 troubleshooting 97
- 97 appendix 97
- To read more faqs for your motherboard please go to the support downloads motherboard faq page on gigabyte s website 97
- 3 2 troubleshooting procedure 98
- Appendix 98 98
- If you encounter any troubles during system startup follow the troubleshooting procedure below to solve the problem 98
- 99 appendix 99
- If the procedure above is unable to solve your problem contact the place of purchase or local dealer for help or go to the support downloads technical service zone page to submit your question our customer service staff will reply you as soon as possible 99
- 4 regulatory statements 100
- Our commitment to preserving the environment 100
- Regulatory notices 100
- Restriction of hazardous substances rohs directive statement 100
- Waste electrical electronic equipment weee directive statement 100
- Weee symbol statement 100
- China restriction of hazardous substances table 101
- 103 appendix 103
- Contact us 103
- Appendix 104 104
- Gigabyte global service system 104
- To submit a technical or non technical sales market ing question please link to http ggts gigabyte com tw then select your language to enter the system 104
Похожие устройства
- Hyundai H-TV1407 Инструкция по эксплуатации
- D-Link DSR-1000 Инструкция по эксплуатации
- Sven SPS 607 Инструкция по эксплуатации
- Gigabyte GA-790XTA-UD4 (rev.1) Инструкция по эксплуатации
- Scarlett SC-1139S Инструкция по эксплуатации
- D-Link DSR-250 Инструкция по эксплуатации
- Sven SPS-611S дер.2.0 Инструкция по эксплуатации
- Gigabyte GA-790XT-USB3 (rev.1) Инструкция по эксплуатации
- Samsung RSH1K/J*** Инструкция по эксплуатации
- D-Link DSR-500 Инструкция по эксплуатации
- Sven Stream Light Cherry Инструкция по эксплуатации
- Nikon COOLPIX S2600 Black Инструкция по эксплуатации
- LG DS375 Инструкция по эксплуатации
- D-Link DVG-5402SP Инструкция по эксплуатации
- Gigabyte GA-790FXTA-UD5 (rev.1) Инструкция по эксплуатации
- Nikon COOLPIX S3300 Black Инструкция по эксплуатации
- D-Link DVG-7111S Инструкция по эксплуатации
- Gigabyte GA-785GMT-USB3 (rev1) Инструкция по эксплуатации
- Nikon COOLPIX S8200 Black Инструкция по эксплуатации
- D-Link DGL-4100 Инструкция по эксплуатации