Home
Главная
Philips
Монитор С Tv
190TW8FB
Инструкция по эксплуатации Страница: 17

Philips 190TW8FB [17/19] Glossary

Tips

Glossary

Poor reception The proximity of mountains or high buildings may be responsible for ghost

pictures, echoing or shadows. In this case, try manually adjusting your picture:

see Finetune (p.9) or modify the orientation of the outside aerial. If you are

using an indoor aerial, reception may be difﬁcult in certain conditions. You can

improve reception by rotating the aerial. If the reception remains poor, you

will need to use an external aerial

No picture Have you connected the aerial socket properly ? Have you chosen the right

system? (p.10). Poorly connected euroconnector cables or aerial sockets are

often the cause of picture or sound problems (sometimes the connectors can

become half disconnected if the TV Monitor set is moved or turned). Check all

connections.

No sound If on certain channels you receive a picture but no sound, this means that you

do not have the correct TV Monitor system. Modify the System setting (p.10).

The am pliﬁer connected to the TV Monitor does not deliver any sound?

Check that you have not confused the audio output with the audio input.

PC mode

don’t work ?

Check that you have conﬁgured the computer on a compatible display

resolution (see p.8).

Remote control

The TV Monitor set does not react to the remote control; the indicator on the

set no longer ﬂashes when you use the remote control? Replace the battery.

Standby If the set receives no signal for 30 mins, it automatically goes into standby

mode. To save power, your set is ﬁtted with components that give it a very

low power consumption when in standby mode (less than 1 W).

Cleaning the

set

Only use a clean, soft and lint-free cloth to clean the screen and the casing of

your set. Do not use alcohol-based or solvent-based products.

Still no results? Disconnect the mains plug of the TV Monitor for 30 seconds then reconnect it.

If your TV Monitor set breaks down, never attempt to repair it yourself: contact ’s

your dealer after-sales service.

VGA (Video Graphics Array): a common stan-

dard graphics display system for PCs.

RGB signals : These are the three video signals,

Red Green Blue, which make up the picture.

Using these signals improves picture quality.

S-VHS Signals: These are 2 separate Y/C video

signals from the S-VHS and Hi-8 recording stan-

dards.The luminance signals Y (black andwhite)

and chrominance signals C (colour) are recorded

separately on the tape.This provides better

picture quality than with standard video(VHS and

8 mm) where the Y/C signals are combined to

provide only one video signal.

NICAM sound: Process by which digital sound can

be transmitted.

System: Television pictures are not broadcast in

the same way in all countries. There are different

standards: BG, DK, I, and L L’. The System setting

(p.10) is used to select these different standards. This

is not to be confused with PAL or SECAM colour

coding. Pal is used in most countries in Europe,

Secam in France, Russia and most African countries.

The United States and Japan use a different system

called NTSC. The input EXT is used to read NTSC

coded recordings.

16:10: Refers to the ration between the length and

height of the screen. Wide screen televisions have

a ration of 16/10, conventional screen TV Monitor

sets have aration of 4/3.

Philips 190TW8FB [17/19] Glossary

Содержание

Похожие устройства