![D-Link DES-1210-10/ME [35/370] Reboot](/img/pdf.png)
D-Link DES-1210-10/ME [35/370] Reboot
![D-Link DES-1210-10/ME [35/370] Reboot](/views2/1459128/page35/bg23.png)
DES-1210 Metro Ethernet Managed Switch CLI Reference Guide
21
DES-1210-28/ME:5# reload config config_id 1
Command: reload config config_id 1
Are you sure you want to reload the config?(y/n)y
% Reload config 1 successfully.
Are you sure you want to proceed with the system reboot?(y/n)y
% Please wait, the switch is rebooting...
reboot
Purpose
To reboot the Switch. If the Switch is a member of a stack, it may be
rebooted individually, without affecting the other members of the
stack.
Syntax
reboot
Description
The reboot command restarts the Switch.
Parameters
None.
Restrictions
Only Administrator -level users can issue this command.
Example usage:
To restart the Switch:
DES-1210-28/ME:5# reboot
Command: reboot
Are you sure you want to proceed with the system reboot?(y/n)y
% Please wait, the switch is rebooting...
DES-1210-28/ME:5# System will Reboot....
Boot Procedure
--------------------------------------------------------------------------------
Please wait, loading Runtime image ........................ 100%
MAC Address : 00-AE-BF-CB-2D-8D
H/W Version : Rev.B2
F/W Version : 6.02.008
--------------------------------------------------------------------------------
DES-1210-28/ME Fast Ethernet Switch
Command Line Interface
Firmware: Build 6.02.008
Copyright(C) 2012 D-Link Corporation. All rights reserved.
Содержание
- Cli reference guide 1
- Table of contents 3
- Introduction 15
- Using the console cli 17
- Command syntax 21
- Square brackets 21
- Vertical bar 21
- Braces 22
- Line editing key usage 22
- Multiple page display control keys 22
- Basic switch commands 24
- Command parameter 24
- Disable password encryption 25
- Enable password encryption 25
- Create account 26
- Config account 27
- Show account 27
- Delete account 28
- Show session 28
- Show switch 29
- Config serial_port 30
- Show serial_port 30
- Disable clipaging 31
- Enable clipaging 31
- Enable web 31
- Disable web 32
- Enable autoconfig 32
- Disable autoconfig 33
- Show autoconfig 33
- Reload config 34
- Reboot 35
- Logout 36
- Enable telnet 38
- Disable telnet 39
- Show tech support 39
- Command parameter 41
- Disable smtp 41
- Enable smtp 41
- Smtp server commands 41
- Config smtp 42
- Show smtp 42
- Smtp sent_testmsg 43
- Command parameter 45
- Config command_prompt 45
- Modify banner and prompt commands 45
- Config greeting_message 46
- Show greeting_message 47
- Command parameter 48
- Config ports 48
- Switch port commands 48
- Show ports 49
- Command parameter 50
- Disable loopdetect 50
- Enable loopdetect 50
- Loopback detection commands 50
- Config loopdetect mode 51
- Config loopdetect ports 51
- Config loopdetect 52
- Show loopdetect 52
- Command parameter 54
- Config dos_prevention dos_type 54
- Dos prevention commands 54
- Show dos_prevention 55
- Command parameter 57
- Config pppoe circuit_id_insertion state 57
- Pppoe circuit id insertion commands 57
- Config pppoe circuit_id_insertion ports 58
- Show pppoe circuit_id_insertion 58
- Show pppoe circuit_id_insertion ports 59
- Command parameter 60
- Config filter dhcp_server 60
- Dhcp server screening commands 60
- Show filter dhcp_server 61
- Command parameter 62
- Ip mac port binding commands 62
- Config address_binding ip_mac ports 63
- Create address_binding ip_mac 63
- Config address_binding auto_scan 64
- Config address_binding auto_scan ipv6address 64
- Delete address_binding 65
- Show address_binding 65
- Show address_binding auto_scan list 66
- Config address_binding dhcp_snoop max_entry ports 67
- Disable address_binding dhcp_snoop 67
- Enable address_binding dhcp_snoop 67
- Show address_binding dhcp_snoop 68
- Command parameter 70
- Network management snmp commands 70
- Command parameter 71
- Command parameter 72
- Create snmp user 73
- Delete snmp user 73
- Create snmp view 74
- Show snmp user 74
- Delete snmp view 75
- Show snmp view 75
- Create snmp community 76
- Delete snmp community 77
- Show snmp community 77
- Config snmp engineid 78
- Show snmp engineid 78
- Create snmp group 79
- Delete snmp group 80
- Show snmp global state 80
- Create snmp host 81
- Show snmp groups 81
- Delete snmp host 83
- Show snmp host 83
- Create snmp v6host 84
- Delete snmp v6host 85
- Show snmp v6host 85
- Create trusted_host 86
- Disable trusted_host 86
- Enable trusted_host 86
- Show trusted_host 87
- Delete trusted_host 88
- Disable snmp traps 89
- Enable snmp authenticate traps 89
- Enable snmp traps 89
- Disable snmp authenticate traps 90
- Show snmp traps 90
- Config snmp linkchange_traps ports 91
- Show snmp traps linkchange_traps 91
- Config snmp system_contact 92
- Config snmp system_location 92
- Config snmp system_name 93
- Config snmp warmstart_traps 93
- Disable snmp 94
- Enable snmp 94
- Enable snmp dhcp_ screening traps 94
- Disable snmp dhcp_ screening traps 95
- Enable snmp impb_violation traps 95
- Disable snmp firmware_upgrade_state traps 96
- Disable snmp impb_violation traps 96
- Enable snmp firmware_upgrade_state traps 96
- Disable snmp lbd traps 97
- Enable snmp lbd traps 97
- Disable snmp port_security_violation traps 98
- Enable snmp port_security_violation traps 98
- Disable snmp rstpport_state_change traps 99
- Enable snmp duplicate_ip_detected traps 99
- Enable snmp rstpport_state_change traps 99
- Disable snmp duplicate_ip_detected traps 100
- Command parameter 101
- Download 101
- Download upload commands 101
- Upload 102
- Config configuration config_id 103
- Show config 104
- Show firmware information 104
- Command parameter 106
- Dhcp relay commands 106
- Enable dhcp_relay 106
- Config dhcp_relay add ipif system 107
- Disable dhcp_relay 107
- Config dhcp_relay delete ipif system 108
- Config dhcp_relay hops 108
- Config dhcp_relay option_82 109
- Enable dhcp_local_relay 110
- Show dhcp_relay 110
- Config dhcp_local_relay vlan 111
- Disable dhcp_local_relay 111
- Enable dhcpv6_relay 112
- Show dhcp_local_relay 112
- Disable dhcp_relay 113
- Show dhcpv6_relay 113
- Config dhcpv6_relay 114
- Config dhcpv6_relay hop_count 114
- Command parameter 115
- Config gratuitous_arp send ipif_status_up 115
- Gratuitous arp commands 115
- Config gratuitous_arp learning 116
- Config gratuitous_arp send dup_ip_detected 116
- Disable gratuitous_arp 117
- Enable gratuitous_arp 117
- Config gratuitous_arp send periodically interval 118
- Show gratuitous_arp 118
- Command parameter 120
- Network monitoring commands 120
- Show packet ports 120
- Show error ports 121
- Show utilization 122
- Clear counters 123
- Clear log 123
- Show log 123
- Disable syslog 124
- Enable syslog 124
- Create syslog host 125
- Show syslog 125
- Config syslog host 127
- Delete syslog host 129
- Cable diagnostic port 130
- Show syslog host 130
- Command parameter 132
- Config stp 132
- Spanning tree commands 132
- Config stp ports 133
- Config stp fbpdu 135
- Config stp priority 135
- Config stp version 135
- Disable stp 136
- Enable stp 136
- Show stp 137
- Show stp ports 138
- Show stp instance 139
- Create stp instance_id 140
- Delete stp instance_id 140
- Show stp mst_config_id 140
- Config stp instance_id 141
- Config stp mst_config_id 141
- Config stp mst_ports 142
- Command parameter 144
- Create fdb 144
- Forwarding database commands 144
- Config multicast_fdb 145
- Create multicast_fdb 145
- Config fdb aging_time 146
- Delete fdb 146
- Disable flood_fdb 147
- Enable flood_fdb 147
- Clear flood_fdb 148
- Show flood_fdb 148
- Show multicast_fdb 148
- Show fdb 149
- Config multicast filter 150
- Show multicast filter port_mode 150
- Create auto_fdb 151
- Delete auto_fdb 151
- Show auto_fdb 152
- Broadcast storm control commands 153
- Command parameter 153
- Config traffic control 153
- Config traffic trap 154
- Show traffic control 154
- Command parameter 156
- Qos commands 156
- Command parameter 157
- Config scheduling 157
- Show scheduling 158
- Config bandwidth_control 159
- Config cos mac_mapping 160
- Show bandwidth_control 160
- Config cos ip_mapping 161
- Delete cos mac_mapping 161
- Show cos mac_mapping 161
- Delete cos ip_mapping 162
- Show cos ip_mapping 162
- Config cos ipv6_mapping 163
- Show cos ipv6_mapping 163
- Config cos ipv6_tc_mapping 164
- Delete cos ipv6_mapping 164
- Config cos mapping 165
- Delete cos ipv6_tc_mapping 165
- Show cos mapping 165
- Config cos protocol_mapping 166
- Delete cos protocol_mapping 167
- Show cos protocol_mapping 167
- Config cos vlanid_mapping 168
- Show cos vlanid_mapping 168
- Config cos tos value 169
- Delete cos vlanid_mapping 169
- Show cos tos 169
- Config cos tcp_port_mapping 170
- Show cos tcp_port_mapping 170
- Config cos udp_port_mapping 171
- Delete cos tcp_port_mapping 171
- Delete cos udp_port_mapping 172
- Show cos udp _port_mapping 172
- Config 802 p user_priority 173
- Show 802 p user_priority 173
- Config 802 p default_priority 174
- Config scheduling_mechanism 175
- Show 802 p default_priority 175
- Config dscp mode 176
- Show scheduling_mechanism 176
- Config dscp_mapping 177
- Show dscp_mapping 177
- Command parameter 179
- Enable rmon 179
- Rmon commands 179
- Create rmon alarm 180
- Disable rmon 180
- Create rmon collection stats 181
- Delete rmon alarm 181
- Create rmon collection history 182
- Delete rmon collection stats 182
- Create rmon event 183
- Delete rmon collection history 183
- Delete rmon event 184
- Show rmon 184
- Command parameter 186
- Disable mirror 186
- Enable mirror 186
- Port mirroring commands 186
- Config mirror target 187
- Show mirror 188
- Command parameter 189
- Vlan commands 189
- Command parameter 190
- Create vlan 190
- Delete vlan 190
- Config vlan 191
- Config gvrp 192
- Config gvrp timer 192
- Disable gvrp 193
- Enable gvrp 193
- Create dot1v_protocol_group 194
- Show vlan 194
- Config dot1v_protocol_group 195
- Delete dot1v_protocol_group 195
- Show dot1v_protocol_group 196
- Show gvrp 196
- Enable vlan_trunk 197
- Show gvrp timer 197
- Disable vlan_trunk 198
- Show vlan_trunk 198
- Config vlan_trunk ports 199
- Disable asymmetric_vlan 199
- Enable asymmetric_vlan 199
- Enable management vlan 200
- Show asymmetric_vlan 200
- Config management vlan 201
- Disable management vlan 201
- Show management vlan 201
- Disalbe pvid auto_assign 202
- Enable pvid auto_assign 202
- Show pvid auto_assign 203
- Command parameter 204
- Enable qinq 204
- Q in q commands 204
- Disable qinq 205
- Show qinq 205
- Config qinq ports 206
- Create vlan_translation 206
- Delete vlan_translation cvid 207
- Show vlan_translation 207
- Command parameter 208
- Create link_aggregation 208
- Link aggregation commands 208
- Config link_aggregation group_id 209
- Delete link_aggregation 209
- Config link_aggregation algorithm 210
- Config link_aggregation state 210
- Show link_aggregation 211
- Basic ip commands 212
- Command parameter 212
- Config ipif system 212
- Show ipif 213
- Bpdu attack protection commands 214
- Command parameter 214
- Config bpdu_protection ports 214
- Config bpdu_protection recovery_timer 215
- Config bpdu_protection 216
- Enable bpdu_protection 216
- Disable bpdu_protection 217
- Show bpdu_protection 217
- Command parameter 219
- Config ethernet_oam ports 219
- Ethernet oam commands 219
- Config ethernet_oam ports 220
- Show ethernet_oam ports 221
- Show ethernet_oam ports 222
- Show ethernet_oam ports 223
- Show ethernet_oam ports 224
- Clear ethernet_oam ports 225
- Command parameter 226
- Disable mac_notification 226
- Enable mac_notification 226
- Mac notification commands 226
- Config mac_notification 227
- Config mac_notification ports 227
- Show mac_notification 228
- Show mac_notification ports 228
- Command parameter 230
- Igmp snooping commands 230
- Command parameter 231
- Config igmp_snooping 231
- Config igmp_snooping querier 232
- Config igmp_snooping querier_selection 232
- Config igmp_snooping multicast_vlan 233
- Create igmp_snooping multicast_vlan 233
- Config igmp_snooping multicast_vlan_group 234
- Delete igmp_snooping multicast_vlan 234
- Config igmp_snooping data_driven_learning 235
- Clear igmp_snooping data_driven_group 236
- Config router_ports 236
- Config router_ports_forbidden 237
- Config igmp access_authentication ports 238
- Show igmp access_authentication ports 238
- Disable igmp_snooping 239
- Enable igmp_snooping 239
- Show igmp_snooping 240
- Show igmp_snooping group 240
- Show igmp_snooping forwarding 241
- Show igmp_snooping host 242
- Show router_ports 242
- Command parameter 244
- Mld snooping commands 244
- Command parameter 245
- Disable mld_snooping 245
- Enable mld_snooping 245
- Config mld_snooping 246
- Create mld_snooping multicast_vlan 246
- Config mld_snooping multicast_vlan 247
- Delete mld_snooping multicast_vlan 248
- Show mld_snooping multicast_vlan 248
- Config mld_snooping multicast_vlan_group 249
- Show mld_snooping multicast_vlan_group 249
- Config mld_snooping mrouter_ports 250
- Config mld_snooping mrouter_port_forbidden 251
- Config mld_snooping querier 251
- Config mld_snooping data_driven_learning 252
- Clear mld_snooping data_driven_group 253
- Show mld_snooping 253
- Show mld_snooping forwarding 254
- Show mld_snooping group 255
- Show mld_snooping mrouter_ports 255
- Show mld_snooping host 256
- Command parameter 258
- Create mcast_filter_profile 258
- Limited ip multicast address commands 258
- Config mcast_filter_profile profile_id 259
- Config mcast_filter_profile profile_name 259
- Config mcast_filter_profile ipv6 260
- Delete mcast_filter_profile 260
- Show mcast_filter_profile 261
- Config limited_multicast_addr 262
- Show limited_multicast_addr 262
- Config max_mcast_group 263
- Show max_mcast_group 263
- Command parameter 265
- X commands 265
- Command parameter 266
- Disable 802 x 266
- Enable 802 x 266
- Show 802 x 267
- Show 802 x auth_state 267
- Show 802 x auth_configuration 268
- Config 802 x auth_parameter ports 269
- Config 802 x init 270
- Config 802 x auth_protocol 271
- Config 802 x reauth 271
- Config radius add 272
- Config radius 273
- Config radius delete 273
- Config 802 x fwd_pdu system 274
- Show radius 274
- Config 802 x auth_mode 275
- Show 802 x fwd_pdu system status 275
- Create 802 x guest_vlan 276
- Delete 802 x guest_vlan 276
- Config 802 x guest_vlan ports 277
- Show 802 x guest_vlan 277
- Create 802 x user 278
- Show 802 x user 278
- Config 802 x capability ports 279
- Delete 802 x user 279
- Command parameter 281
- Config port_security 281
- Port security commands 281
- Show port_security 282
- Command parameter 283
- Config sntp 283
- Time and sntp commands 283
- Enable sntp 284
- Show sntp 284
- Config time 285
- Disable sntp 285
- Config dst 286
- Config time_zone operator 286
- Show time 287
- Arp commands 289
- Command parameter 289
- Create arpspoofing 289
- Delete arpspoofing 290
- Show arpspoofing 290
- Clear arptable 291
- Config arp_aging time 291
- Show arpentry 292
- Show arpentry aging_time 292
- Command parameter 294
- Create iproute 294
- Routing table commands 294
- Delete iproute 295
- Show iproute 295
- Command parameter 296
- Commands 296
- Config duld ports 296
- D link unidirectional link detection duld 296
- D link unidirectional link detection duld commands 296
- Show duld ports 297
- Command parameter 298
- Create ipv6 neighbor_cache 298
- Ipv6 neighbor discovery commands 298
- Delete ipv6 neighbor_cache 299
- Show ipv6 neighbor_cache 299
- Config ipv6 nd ns ipif system 300
- Create ipv6route default 300
- Delete ipv6route default 301
- Show ipv6route 301
- Disable ipif_ipv6_link_local_auto system 302
- Enable ipif_ipv6_link_local_auto system 302
- Banner commands 304
- Command parameter 304
- Config log_save_timing 304
- Show log 305
- Show log_save_timing 305
- Command history list commands 306
- Command parameter 306
- Show command_history 307
- Command parameter 309
- Enable ssh 309
- Ssh commands 309
- Config ssh algorithm 310
- Disable ssh 310
- Config ssh authmode 311
- Show ssh authmode 311
- Config ssh server 312
- Show ssh server 312
- Show ssh algorithm 313
- Config ssh user 314
- Show ssh user authmode 314
- Command parameter 315
- Enable ssl 315
- Ssl commands 315
- Disable ssl 316
- Show ssl 316
- Download ssl certificate 317
- Access authentication control commands 318
- Command parameter 318
- Command parameter 319
- Config authen_login 319
- Create authen_login method_list_name 319
- Delete authen_login method_list_name 321
- Show authen_login 321
- Create authen_enable method_list_name 322
- Show authen_policy 322
- Config authen_enable 323
- Delete authen_enable method_list_name 324
- Enable authen_policy 325
- Show authen_enable 325
- Config authen application 326
- Disable authen_policy 326
- Show authen application 327
- Config authen parameter 328
- Create authen server_host 328
- Show authen parameter 328
- Config authen server_host 330
- Delete authen server_host 331
- Show authen server_host 331
- Create authen server_group 332
- Config authen server_group 333
- Delete authen server_group 333
- Enable admin 334
- Show authen server_host 334
- Config admin local_enable 335
- Command parameter 336
- Config lacp port_priority 336
- Lacp commands 336
- Show lacp 336
- Config lacp_ports 337
- Command parameter 339
- Lldp commands 339
- Config lldp message_tx_interval 340
- Disable lldp 340
- Enable lldp 340
- Config lldp message_tx_hold_multiplier 341
- Config lldp reinit_delay 341
- Config lldp notification_interval 342
- Config lldp tx_delay 342
- Show lldp 342
- Show lldp ports 343
- Show lldp local_ports 344
- Config lldp ports 345
- Show lldp remote_ports 345
- Config lldp ports 346
- Config lldp ports 347
- Config lldp ports 348
- Show lldp mgt_addr 349
- Show lldp statistics 349
- Access control list commands 351
- Command parameter 351
- Command parameter 352
- Create access_profile 352
- Config access_profile 354
- Delete access_profile 358
- Show access_profile 358
- Create cpu_access_profile 359
- Config cpu_access_profile 360
- Delete cpu_access_profile 362
- Show cpu_access_profile 362
- Command parameter 364
- Config traffic_segmentation 364
- Show traffic_segmentation 364
- Traffic segmentation commands 364
- Command parameter 366
- Config safeguard_engine 366
- Safeguard commands 366
- Show safeguard_engine 366
- Device specifications 368
- Technical specifications 368
- Supported transceivers 370
Похожие устройства
- D-Link DES-1210-10/ME Краткое руководство по установке
- D-Link DES-1210-10/ME Руководство пользователя
- D-Link DGS-1210-12TS/ME Руководство пользователя _CLI_
- D-Link DGS-1210-12TS/ME Краткое руководство по установке
- D-Link DGS-1210-12TS/ME Руководство пользователя _Web UI_
- D-Link DGS-1210-28X/ME Руководство пользователя
- D-Link DGS-1210-28X/ME Руководство пользователя _CLI_
- D-Link DGS-1210-28X/ME Руководство пользователя _Web UI_
- D-Link DGS-1210-28X/ME Краткое руководство по установке
- D-Link DGS-1210-28XS/ME Руководство пользователя
- D-Link DGS-1210-28XS/ME Краткое руководство по установке
- D-Link DGS-1210-28XS/ME Руководство пользователя _Web UI_
- D-Link DGS-1210-28XS/ME Руководство пользователя _CLI_
- D-Link DGS-1210-52/ME rev.B Руководство пользователя _CLI_
- D-Link DGS-1210-52/ME rev.B Краткое руководство по установке
- D-Link DGS-1210-52/ME rev.B Руководство пользователя _Web UI_
- D-Link DGS-1210-52/ME rev.A Руководство по установке
- D-Link DGS-1210-52/ME rev.A Руководство пользователя _Web UI_
- D-Link DGS-1210-52/ME rev.A Руководство пользователя _CLI_
- D-Link DGS-1210-52MPP/ME Краткое руководство по установке
Скачать
Случайные обсуждения