D-Link DGS-1210-12TS/ME [201/519] Command parameter
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

D-Link DGS-1210-12TS/ME [201/519] Command parameter

D-Link DGS-1210-12TS/ME [201/519] Command parameter
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
183
24
FORWARDING DATABASE COMMANDS
The Forwarding Database commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command
Parameter
create fdb
<vlan_name 32> <macaddr> port <port 1-28>
create multicast_fdb
<int 1-4094><macaddr>
config multicast_fdb
<integer 1-4094> <macaddr> [add | delete] <portlist>
config fdb aging_time
<sec 10-1000000>
delete fdb
<vlan_name 32> <macaddr>
enable flood_fdb
disable flood_fdb
show flood_fdb
config flood_fdb [log | trap] [enable | disable]
clear flood_fdb
show fdb
{port <port 1-28> | [vlan <vlan_name 32> | vlanid <vidlist>] | mac_address
<macaddr> | static | aging_time}
clear fdb [all | port <port 1-28> | vlan <vlan_name 32>]
config multicast filter [all | vlan] [filter | forward]
delete auto_fdb <ipaddr>
Each command is listed in detail, as follows:
create fdb
Purpose To create a static entry in the unicast MAC address forwarding table
(database)
Syntax
create fdb <vlan_name 32> <macaddr> port <port 1-28>
Description
The create fdb command creates a static
entry in the Switch’s
unicast MAC address forwarding database.
Parameters
<vlan_name 32> − The name of the VLAN on which the MAC
address resides.
<macaddr> − The MAC address to be added to the forwarding table.
port <port 1-28> − The port number corresponding to the MAC
destination address. The
Switch will always forward traffic to the
specified device through this port.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:

Содержание

Похожие устройства

Скачать