D-Link DCS-7000L [5/17] Mounting the camera

DCS-7000L

ENGLISH

MOUNTING THE CAMERA

Step 1:

Place the mounting base where you want to position the camera

and use a pencil to mark the holes.

Step 2:

Depending on the material of the wall or ceiling, use proper tools to

drill two holes or screws where you marked. If the wall is made out

of concrete, drill the holes rst, insert the plastic anchors and then

the screws. The space between the camera and the screwheads

should be 3mm.

Step 3:

Place the mounting base over the screw that is mounted on the

wall. Make sure to t the screw-heads over the big holes and slide it

downward to lock rmly. Lightly pull the base forward to make sure

that it is locked.

Step 4:

Place the base cover on the base and screw the camera stem

clockwise into the mounting base.

Step 5:

Place the camera over the camera stem and screw into place.

Adjust the angle of the camera as desired, then tighten the collar on

the camera stem to lock it in place.

Please refer to the steps below to assist you with mounting the camera. We suggest that you

congure the camera before mounting.