D-Link DCS-700L [28/43] Advanced features

28D-Link DCS-700L User Manual

Section 7: Advanced Features

Advanced Features

Enabling Direct Connect

Press and hold the Direct Connect button on the back of the camera for

at least ve seconds. The Cloud LED will start blinking blue, indicating

the Direct Connect mode is enabled.

Connect your mobile device to the myBabyCam-xxxx Wi-Fi network. (XXXX

is a 4-digit code, the last 4 digits of your camera’s MAC address.) Use the

Wi-Fi password you created during the Setup Wizard installation process.

During the initial steps with the Setup Wizard, you congured the camera to connect to your home Wi-Fi network. If you want to take your camera

with you, it's not a problem with the DCS-700L.* You can connect directly to your camera, which means there is no need for an Internet connection

or a router. Follow the steps below to enable Direct Connect.

Note: Once you are connected to the camera, you will no longer have Internet

access.

*You have the option of using a portable USB battery pack (not included) that supplies 5V/2A of power when you take the camera with you. Plug

the USB battery pack into the Micro USB power port. The Power LED on the bottom of the camera will turn red when the camera is powered on.

Direct Connect