Beko WKD 25100 T [46/52] Installation

Installation

If your system is not ready, let a certified plumber make it

ready.

1. Removing the transportation safety bolts

Beforethewashingmachineisoperated,thetransitbars

must be removed! In order to do this:

1. Loosen “C” bolts by rotating them counter clockwise

with a suitable spanner

2. Remove transportation safety bolts by turning.

3. Place “P” plastic covers onto the openings of transpor-

tation locks by rotating in direction of arrow and pushing.

Attention please! Keep the transit bars for using when

machine is to be transported again. Always transport your

machine with transportation locks.

2. Leveling the feet

In order to operate your machine without noise and vibra-

tion it must be properly on balance. Four feet of your ma-

chinecanbeadjusted.Firstloosentheplasticcounterbolt.

Tightenthecounterboltafteradjustingthefeetforleveling

your machine.

3. Water Connections

a) Water Inlet Hose

Yourmachineisconnectedtowatersupplybyspecial

hoses supplied by the machine. Red hose or hose

written red on it is hot water inlet, blue hose or hose

written blue on it is cold water inlet.

There are plastic seals (4 for double water inlet mod-

els, 2 for single water inlet models) on hose or plastic

bag for eliminating any leakage in connections points.

These seals must be used on each side of the connec-